Japan, Obishi Keiki
Obishi Keiki Seisakusho Repeat Meter
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Stock No : 216
- Measurement of Surface Plate Flatness, Straightness etc can be done easily.
- At 3 points of the fulcrum interval 100mm, flat surface unevenness is measured
- Before measurement, perform zero setting on the master surface plate.
*Dial Gauge is sold separately.
Main Equipment
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Measurement Pitch (mm) | Mass (kg) |
|---|---|---|---|---|
| CB101 | 200 | 240×60×90 | 100 | 4.5 |
Master Surface Plate
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Flatness (μm) | Mass (kg) |
|---|---|---|---|---|
| CB102 | 300 | 300×75×150 | 1 | 10 |
Related Products
-
Kanetec KCT-Series Water Cooled Electromagnetic Chuck
-
Line Seiki MCF Series Totalizer (Small Size)
-
BIX BBS – BTH One-Touch Bit Through Socket & Tap Holder
-
Chiyoda Seiki SGX-25N Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)
-
SAKUSAKU K16 Torx Keys For Threading Tools
-
Kanetec PCMG Super powerful rectangular grid type magnetic bar unit
