Japan, Obishi Keiki
Obishi Keiki Seisakusho Straightness Tester
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Stock No : 215
- On the granite standard straight edge lower surface, 3 saddle supports are attached.
- The accuracy surface is high precision and light weight.
- By moving the slider, straightness can easily be measured.
- By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
- Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.
*Dial Gauge is sold separately.
Main Equipment
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Effective Measurement Lenght (mm) | Straightness (μm) | Mass (kg) |
|---|---|---|---|---|---|
| CA101 | 500 | 640×60×125 | 500 | 2 | 18 |
| CA102 | 1000 | 1140×60×125 | 1000 | 4 | 30 |
Master Surface Plate
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Flatness (μm) | Mass (kg) |
|---|---|---|---|---|
| CA201 | 500 | 640×125×110 | 1.5 | 25 |
| CA202 | 1000 | 1140×125×110 | 3.0 | 44 |
Related Products
-
Chiyoda Seiki TKR-3000PH Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 20.0 MPa or less/adjustment pressure 1.0 to 6.0 MPa, standard flow rate: 4800 m3/h・Air)
-
Wasino Kiki With Various Linings and Coatings Sight Glass
-
Koizumi Sokki VNet8 GNSS Reference Station Receiver
-
Organo ORGAMIN Series Nutritional Supplements
-
Kansai Electric Heat Corp HAS-Series Multi-Dryer
-
H.H.H Sanma Block / Stainless Steel Pulley
