Okabe
Okabe A10-0040 Beam Clamp
Product Made in Japan
Manufacturer: Okabe
Model: A10-0040
For H-beam & φ42.7 or φ48.6 steel pipe
Product | Weight (kg/pc) | Quantity (pc/bag) | Weight (kg/bag) | Packing |
---|---|---|---|---|
A-1 (Fixed) | 1.04 | 20 | 20 | PP bag |
A-2 (Swivel) | 1.04 | 20 | 20 | |
B-1 (Fixed) | 1.04 | 20 | 20 | |
B-2 (Swivel) | 1.04 | 20 | 20 | |
C (Preset Lateral) | 1.80 | 15 | 22 | |
C (Preset Top or Under) | 1.80 | 15 | 22 |
- Features
Specially designed hot rolled material is used for the U- shaped part.
The wide U-shaped part provides excellent stability. Compact design.
The clamp can be securely fastened to a steel frame be- cause of the use of high tensile cup point bolts as lock bolts.
Cautions
Tightening torque for both U-shaped hardware and single clamp is 3.43~4.41kN·cm (350~450kgf·cm).
Two beam clamps must be installed for clamping.
Regarding the common type clamp, check the tightening of the clamp attaching bolt before using the clamp. [Tightening torque: 2.45kN·cm (250kgf·cm)]
Do not use the clamp in such a direction as to cause slipping or falling from the H-beam, etc.
Fit the U-shaped hardware to the H-beam etc., until fully inserted, and tighten the U-shaped hardware.
H-beam etc., to which the clamp is attached must be 6mm or more in thickness.
The applicable flange thickness is up to 32mm.
The clamp must be used within the allowable load.