Product Made in Japan
Manufacturer: Okabe
Model: A30-0420

Non-welded scaffolding hanging frame for H-beam

How to use

1. Cross the suspenders, and hitch the grip hardware on the flange of the steel beam. (See Fig. 2.)
2. Insert the clip into the suspender holes which match the flange width, and lock the suspenders. (See Fig. 1)
3. Tighten each bolt for the grip hardware at the allocated positions. (See Fig. 2.)
4. Install scaffolding board, handrail pipe, etc. Then, lift and install the steel beam.

Cautions

• The product should be installed at intervals of 1,800mm (1,829mm) or less.
• Use the right and left suspender holes at the symmetrical positions and lock the suspenders securely with the clip.
• Tighten the grip hardware with a tightening torque of 3.43kN・cm (350kgf・cm).