Okabe B10-0510 Separator Joint Pocket |

Okabe

Okabe B10-0510 Separator Joint Pocket

Product Made in Japan
Manufacturer: Okabe
Model: B10-0510

Joint pocket for post-installation of beam work separator

◆Product specification

● Applicable Separator sizes: W5/16

● Allowable tensile load: 7.35kN (750kgf)

Calculation method:
Basic formula: Beam width ± adjustment dimension = Separator to be used

●Adjustment dimension chart (mm)

Left side	Right side
Left side	Type Zero (For hat type)	Type A (For hat type)	Type B (For finishing – Plastic cones, Insulation part)	Type C (For finishing)
Type Zero (For hat type)	0	-5	-20	+5
Type A (For hat type)	-5	-10	-25	0
Type B (For finishing – Plastic cones, Insulation part)	-20	-25	-40	-15
Type C (For finishing)	+5	0	-15	+10

● Basic formula Example:
Beamwidth of 500mm/Separator to be used: Type B

Type		Beam width	Adjustment dimension	Calculation formula	Separator to be used
Right side	Left side	(mm)	(mm)	(mm)	(Order)
Type Zero	Type Zero	500	±0	500±0=500	B-500
Type Zero	Type Zero	500	-20	500-20-480	B-480
Type A	Type A	500	-10	500-10=490	B-490
Type B	Type B	500	-40	500-40-460	B-460
Type C	Type C	500	+10	500+10=510	B-510

◆Working method

◆Quantity

Product	Quantity (pc/case)	Weight (kg/case)	Packing
Separator Joint Pocket Type Zero	250 (including nuts)	12	Case
Separator Joint Pocket Type A	250 (including nuts)	13	Case
Separator Joint Pocket Type B	250 (including nuts)	10	Case
Separator Joint Pocket Type C	250 (including nuts)	11	Case

Caution
● Install the product with the opening face upward.
● Tighten form ties and fasten the product securely
● Do not hammer the main body.
● Make sure that the thread of the separator has passed the stopper ( ④ ).
● Do not deform the main body of the hardware. (This will cause a deterioration of the stopper function and strength.)