Okabe
Okabe B90-0610 Transparent Formwork Panel
Product Made in Japan
Manufacturer: Okabe
Model: B90-0610
Methacryl resin formwork pane
◆Face plate:
Unmodified methacrylate resin cast panel: Excellent in transparency, durability, thermal tolerance, mechanical strength, and moldability.
◆Frame
Urethane-resin coated lauan: Lightweight and excellent in workability.
* Other frames are also available
◆Standard size
Symbol | Shape dimensions (mm) | Symbol | Shape dimensions (mm) |
---|---|---|---|
9018 | 900 x 1800 | 9015 | 900×1500 |
6018 | 600 x 1800 | 6015 | 600×1500 |
4518 | 450 x 1800 | 4515 | 450×1500 |
3018 | 300 x 1800 | 3015 | 300×1500 |
9012 | 900 x 1200 | 9009 | 900 x 900 |
6012 | 600 x 1200 | 6009 | 600 x 900 |
4512 | 450 x 1200 | 4509 | 450 x 900 |
3012 | 300 x 1200 | 3009 | 300 x 900 |
Others | Made-to-Order |
Features
● Transparent Panels!: Easy to confirm visually the status of filling concrete.
Cautions
This is a methacrylate resin product. Methacrylate resin is a thermoplastic, combustible, and organic solvent-soluble resin. The following are important points about handling this product. Please use the information to ensure safe use of the product.
● Precautions for use
When handling this product, please pay attention to the following points:
– The face plate is smooth and very slippery. Pay sufficient attention when storing, transporting, and working with the product.
– Concrete can be removed just by washing the product with water immediately after use and wiping it with a rag or towel.
– Note that the cut ends of the face plate may crack or chip etc.
– Be careful not to overtighten Form Ties.
– Use a special drill to make holes for inserting Separators. (Using a general type drill is dangerous.)
– To repair separator through holes, use stoppers, etc., available on the market. (Be careful not to break the product when striking the stopper.)
– In the case where Separators are used, use Plastic Cones with detachable axes, and pay attention so that the axes of the Separator do not get caught in the separator through holes during disassembly.
– Be sure to apply a stripping agent before installation.
– It is difficult and dangerous to reprocess the product on-site.
Please consult us about reprocessing.
– Avoid using a steel scraping bar or buff on the face plate surfaces.