Japan, Okudaya Giken
Okudaya Giken HC Series Manual High Catch
Made in Japan
Manufacturer: Okudaya Giken
Model: HC Series
Features
- A transport machine equipped with pallet truck operation capabilities.
- Easy to incorporate into processing and assembly lines.
- A two-stage hydraulic cylinder with a tough design.
- Comes with a one-touch neutral lever.
- Comes with a quick-lifting device that increases lift-up speed by approximately 2.5 to 3 times.
- Auxiliary casters can be installed to ensure stability.
Specifications
| Model | Maximum load capacity (kg) | Lowest position (mm) | Highest position (mm) | Fork (mm) | Total length (mm) | Overall width (mm) | Overall height (mm) | Pump number of times (times) | Vehicle weight (kg) | |
|---|---|---|---|---|---|---|---|---|---|---|
| length | Outer Width | |||||||||
| A | B | C | E | F | G | H | ||||
| HC-5A-70 | 500 | 85 | 720 | 930 | 520 | 1345 | 590 | 1015 | 30 (10) | 90 |
| HC-5B-70 | 685 | 691 | 95 | |||||||
| HC-10A-45 | 1000 | 450 | 800 | 520 | 1280 | 520 | 1200 | 40 (15) | 113 | |
| HC-10B-45 | 685 | 685 | 121 | |||||||
| HC-10A-70 | 700 | 1070 | 520 | 1550 | 520 | 86 (36) | 130 | |||
| HC-10B-70 | 685 | 685 | 136 | |||||||
- *The number in parentheses for the pump frequency is the number of times the pump was quickly lifted without load.
Related Products
-
Tosei Sharyo TBR Series Ductile Caster
-
Tohnichi FTD-S Indicating Torque Screwdriver
-
Eagle Clamp G Type Vertical Clamp For H-Shaped Steel
-
NTK Cutting Tools – Cubic Boron Nitride Grades
-
LOBTEX 1213A Socket Wrench Set Drive：12.7mm（1/2″）Dodecagon〔17pieces〕
-
Eagle Jack (Konno Corporation) G-40LC Hydraulic Claw Jack
