Japan, Orientalmotor
Orientalmotor EMR Series EC Fans
Made in Japan
Manufacturer: ORIENTAL MOTOR CO., LTD.
Model: EMR Series
Reduces Power Consumption by Up to 42 %*
By using brushless motors, power consumption is greatly reduced compared to conventional models, while having the same characteristics.
In addition, the same characteristics can be achieved regardless of what frequency is used.
*Comparison between conventional products at 60 Hz and EMR Series at rated speed
Energy Savings and Noise Reduction Achieved With Air Flow Adjustment
The speed control enables not only utilization of a wide range of air flow volume, but also allows adjustment of the air flow as necessary to reduce power consumption and noise.
Selectable Operation Methods
Air Flow – Static Pressure Characteristics (Reference values)*
*Characteristic when finger guards are attached to both sides.
Mass Reduced by About 40 %
The compact and powerful brushless motor has considerably less mass than conventional products.
Easy Installation, Easy Wiring
Installation is Easy With the Pre-Attached Finger Guards
Easy Wiring
Soldering and crimping tools are not required for connecting the main power supply to the I/O signal connector. The wiring can be performed by just inserting the lead wires.
Alarm Function Equipped, Fan Status Indicated by LED
An alarm is output when the rotation slows down or another abnormality occurs with the fan.
The LED lights up in green under normal conditions and blinks in red under abnormal conditions.
The status of the fan can be checked by the LED.
Alarm Types
- Low speed
- Overcurrent
- Sensor abnormality
- Overvoltage
- Undervoltage
Choose Cables and Accessories
Power supply cables and external speed potentiometers are available for use with EMR Series cooling fans.
Product Line
Type | Size | Voltage [V] |
Maximum Air Flow [m3/min] |
Maximum Static Pressure [Pa] |
---|---|---|---|---|
Fans | □180 mm – 65 mm thick | Single-Phase 100-120 | 9.0 | 154 |
Single-Phase 200-240 Three-Phase 200-240 |
- 2 finger guards attached.