Cervical

The new chuck (patented) grips the drum more “firmly”. A nylon pad is used at the bottom, so the drum is less likely to be scratched.

Swing

The chuck shakes its head (patent – 50° left and right) for easier alignment and easier gripping.

Since the lower pawl is not fixed, the chuck follows the shaking of the drum that occurs while driving, making it difficult to come off.
* In the case of empty drums, there is a risk of falling when driving on rough roads or steps.
To prevent a fall altogether, consider an optional chuck with a locking pin.

Specifications

It is a high overall height type of E type and N type.
When the drum is attached, the height of the forklift mast can be reduced by 200 mm, so it can be used effectively in places with upper limits (such as in containers).

Model	E1 & E2	N1-S, N2-S
Overall height mm	934	976

Fork outlet dimensions

* For poly drums, please refer to Cam Auto for poly drum transportation.

Optional (please specify when ordering)

Wedge Lock ≪ Pull-out Prevention Mechanism≫

patent

The cam auto automatically locks into the fork by simply lifting it. Note)1 Improves
work safety.

Note: 1
・It can be installed on each model (except for the C type), but the length of the fork outlet is 220 mm longer and the overall height is about 52 mm higher.
・Use with a forklift with a forklift thickness of 30~40mm (750mm from the fork tip).

Wide rubber pads

Please consider this if you want to handle the drum with the utmost care.

Wide rubber pads (swing)

(Optional for standard type)
* Cannot be installed on high-neck type or C type.

Rubber nylon pads

(Optional for high-neck type and C-type)

Iron pad (swing) (all models can be attached)
* The drum may be scratched.

---

Kouei is Distributor/Agent of Oasaka Taiyu.
Other items of Oasaka Taiyu.
Request the quotation for Oasaka Taiyu