Ross Asia RER1 series Electropneumatic proportional valve Kouei Japan Trading

Ross Asia RER1 series Electropneumatic proportional valve

Made in Japan
Manufacturer : Ross Asia
Model :RER1 series

Two design options available: Piston design for highest air flow,Diaphragm design for high sensitivity and quick response

Modular or In-line Mounting options

Pressure Gauge included

Removable Adjusting Knob for tamper resistance

Self-relieving or non-relieving options

Reverse Flow option available on some regulator models

T-Handle option available on some regulator models

Choose your options (in red) to configure your model number.

RER1

Note: High-pressure Proportional valve Q175 psi (12 bar) – inlet and exhaust ports reversed from picture shown.

RER1

Supply Voltage/Current	15 – 24 volts DC/250 mA (required)
Analog Monitor	Voltage	0 – 10 volts DC@20 mA maximum
Analog Monitor	Current	4 – 20 mA sinking (sourcing optional)
Command Signal Impedance	Voltage	4.7 kQ
Command Signal Impedance	Current	100 Q
Command Signal Voltage/Current	0 – 10 volts DC/4 – 20 mA
Electrical Connector	6-pin Brad Harrison or 5-pin M12
Temperature	Ambient	32° to 158°F (0° to 70°C)
Temperature	Media	32° to 158°F (0° to 70°C)
Fluid Media	Compressed air
Operating Pressure	Input	29.9 in Hg to 300 psig (760 mm Hg to 21 bar)
Operating Pressure	Ouput	0 to 200 psi (0 to 14 bar)
Construction Material	Body	Zinc
	Dome	Zinc
	Housing	Aluminum; powder coated
	Manifold	Brass
	Seals	Fluorocarbon
	Transducer	Silicon, Aluminum
	Valve	Nickel-plated Brass
Accuracy	< ± 0.2% F.S.
Linearity/Hysteresis	< ± 0.15% F.S. BFSL
Repeatability	< ± 0.02% F.S.

Japan, Ross Asia