Japan, Royal Master
Royal Master 606NSW Hydraulic Pump Unit – Hydraulic Puncher

Made in Japan
 Manufacturer: Royal Master
 Model: 606NSW
Feature
All units, from small, lightweight models to powerful types, are chosen by our customers for their excellent operability.
 Standard models are used to punch long holes. Long hole bits are also standardized and we have a large inventory. *
 Combined with Royal’s powerful double-acting hydraulic pump, these punching machines punch holes quickly, accurately, safely and quietly. **
 The new 506NSW, a chisel for small section steel, with a 5。 taper for channel steel is standard in stock.
*Long holes are an option for 1150SW only.
 ** The noise is generated when the steel material is very hard.
Technical note:
When making holes with these punches, the hole diameter should be larger than the material thickness (SS400).
Specifications
| Maximum capacity | 350kN (35 tons) | 
| Maximum capacity (ss400) | 22×13 24×12 | 
| Stretch | 60mm | 
| Weight | 18kg | 
| Use hydraulic pump | 70Mpa(720kgf/cm2) Double-acting type | 
| Accessory | 11, 14, 18, 22 | 
Maximum punching speed (Classified by pump/punch combination)
| awl | 606NSW | ||
| Time (seconds) | Punch | Return | |
| Hyd. pump | D-3SW | 1.3 | 0.6 | 
| D-2SW | 2.0 | 0.8 | |
| D-1SW | 3.2 | 0.8 | |
| 1SW-40 | 8.0 | 3.0 | |
Related Products
-   UHT CORPORATION MPRO series Multi Product Punching Machine System Line Up
-   KONAN SP665 Pneumatic Cylinders Oilless Enclosed Cylinders With Reed Switch
-   Fukui FK-HP200EX Cam System Handpress
-   Meiko Engineering RD Expansion Joint
-   Kakuta No.38RKS Hold Down Clamp
-   Seiwa E04FG280808 FG Types Ferrite Cores for FPC and FFC






