Sankei Engineering
Sankei Engineering CP35 – CP35S Spring Contact Probe
Product Made In Japan
Manufacturer: Sankei Engineering
Model: CP35 – CP35S
CP35 – CP35S (Spring contact probe).Durability of bushing: CP more than 1 million strokes.CPR more than 500,000 strokes (2mm stroke, 60 strokes / 60 seconds) .Thermal-endurance: 100ºC or below.
Specification
(mm)
| Fig | Type | Configuration of Tip | a | b | C | d | d’ | e | g | g’ | h | j | k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | CP35 | A, B*, B<0.9>, C, CX, R, T | 30 | 14 | 8 | — | 4 | 9 | 3 | — | 2 (1-3)* | 3.5 | 2.9 |
| 2 | D,DF,E90, E120,F,G60,G90,GX,H,K,KX,L,U,V | 5 | — | ||||||||||
| 3 | J | 33.4 | 17.4 | 5 | 3.4 | 1.4 | |||||||
| J7 | 3.5 | 2.1 | |||||||||||
| J19 | 4.5 | 3.5 | |||||||||||
| J37 | 6 | 4.7 | |||||||||||
| 2 | CPR35 | VC, QN | 30 | 14 | 8 | 5 | — | 9 | 3 | — | 2 | 3.5 | 2.9 |
| 2 | CP35SB | D, DF, E90, E120, F, G120, GX, H, K, KX | 30 | 14 | 8 | 5 | — | 9 | 3.5 | — | 2 | 3.5 | 2.9 |
| 2 | CPR35S | VC, QN | 30 | 14 | 8 | 5 | — | 9 | 3.5 | — | 2 | 3.5 | 2.9 |
| 2 | CP35P | D,DF,E90,E120,F,G60,G90,GX,H,K,KX,L,U,V | 30 | 14 | 8.8 | 5 | — | 9 | 3 | — | 2 | 3 | 2.4 |
| 1 | CP35S | A, B‘, B<0.9>, C, CX, R, T | 30 | 14 | 8.8 | — | 4 | 9 | 3 | — | 2 (1-3)* | 3 | 2.4 |
| 2 | D, DF, E90, E120, F, G120, GX, H, K, KX | 5 | — | 3.5 | — | ||||||||
| 3 | J | 33.4 | 17.4 | 5 | 3.4 | 3 | 1.4 | ||||||
| J7 | 3.5 | 2.1 | |||||||||||
| J19 | 4.5 | 3.5 | |||||||||||
| J37 | 6 | 4.7 |
Related Products
-
Sankei Engineering CPS10 – CPS35 Mini-Probe
-
Sankei Engineering CP25-CP30S Spring Contact Probe
-
Sankei Engineering NCP300 – NCP300BA Spring Contact Probe
-
Sankei Engineering NCP10 – NCP250B Spring Contact Probe
-
Sankei Engineering CP6-CP20B Spring Contact Probe
-
Sankei Engineering NCP10LP – NCP20LB Probe with Long-Shaft Bushing
