Japan, Sankei Engineering
Sankei Engineering NCP10 – NCP250B Spring Contact Probe
Product Made In Japan
Manufacturer: Sankei Engineering
Model: NCP10 – NCP250B
NCP10 – NCP250B (Spring contact probe)
The durability of bushing: more than 1 million strokes (2mm stroke, 60 strokes / 60 seconds)
Thermal-endurance: 100ºC or below.
Stated durability of the bushing is a result of SANKEI internal testing. It is not guaranteed and your actual results may vary.
Specification
| Fig | Type | Configuration of Tip | a | b | c | d | d’ | e | g | g’ | h | j | k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | NCP10 | A, R, T | 32 | 18 | 12.5 | — | 4.9 | 9 | 1 | — | 0.6 | 1.05 | 0.85 |
| 2 | D, E90, F, G90, GX, H, K, KX, L | 5.4 | — | 1.2 | — | ||||||||
| 1 | NCP15<1.5> | A, C, CX, R, T | 32 | 18 | 12.5 | — | 4.9 | 9 | 1.2 | — | 0.8 | 1.25 | 1.05 |
| 2 | D, E90, F, G90, GX, H, K, KX | 5.4 | — | 1.5 | — | ||||||||
| 3 | J | 3.9 | 1.5 | 1.2 | 0.6 | ||||||||
| 2 | NCP15<1.2> | D, E90, F, G90, GX, H, K, KX | 32 | 18 | 12.5 | 5.4 | — | 9 | 1.2 | — | 0.8 | 1.25 | 1.05 |
| 1 | NCP18 | A, C, CX, R | 32 | 18 | 12.5 | — | 4.9 | 9 | 1.5 | — | 1 | 1.5 | 1.25 |
| 2 | D, E90, F, G90, GX, H, K, KX | 5.4 | — | 1.8 | — | ||||||||
| 3 | J | 3.9 | 1.5 | 1.65 | 0.8 | ||||||||
| 1 | NCP11 | A, R | 37 | 23 | 17.5 | — | 4.9 | 9 | 1 | — | 0.6 | 1.05 | 0.85 |
| 2 | D, E90, F, G90, GX, H, K, KX, L | 5.4 | — | ||||||||||
| 1 | NCP11S | A, R | 37 | 23 | 12.4 | — | 10 | 9 | 1 | — | 0.6 | 1.05 | 0.85 |
| 1 | NCP12 | A, CX, R, T | 37 | 23 | 17.5 | — | 4.9 | 9 | 1.2 | — | 0.8 | 1.25 | 1.05 |
| 2 | D, E90, F, G90, GX, H, K, KX | 5.4 | — | ||||||||||
| 1 | NCP12S | A, C, R | 37 | 23 | 12.4 | — | 10 | 9 | 1.2 | — | 0.8 | 1.25 | 1.05 |
| 1 | NCP20 | A, C, CX, R, T | 37 | 23 | 17.5 | — | 4.9 | 9 | 1.5 | — | 1 | 1.5 | 1.25 |
| 2 | D, E90, F, G90, GX, H, K, KX, L | 5.4 | — | ||||||||||
| 3 | J | 3.9 | 1.5 | 1.65 | 0.8 | ||||||||
| 1 | NCP20S | A, C, CX, R, T | 37 | 23 | 12.4 | — | 10 | 9 | 1.5 | — | 1 | 1.5 | 1.25 |
| 1 | NCP25 | A, CX, R | 37 | 23 | 17.45 | — | 4.4 | 9 | 2 | — | 1.3 | 2 | 1.65 |
| 2 | D, E90, F, G90, GX, H, K, KX, | 5.4 | — | ||||||||||
| 3 | J | 14.45 | 5 | 3.4 | 2.5 | 1.4 | |||||||
| 1 | NCP25S | A, CX, R | 37 | 23 | 11.85 | — | 10 | 9 | 2 | — | 1.3 | 2 | 1.65 |
| 1 | NCP250 | A, B, CX, R | 48.5 | 28.5 | 20 | — | 7.35 | 15 | 2 | — | 1.3 | 2.3 | 1.65 |
| 2 | D, E90, F, G90, GX, H, K, KX | 8.35 | — | 2.3 | |||||||||
| 3 | J | 4.95 | 3.4 | 2.5 | 1.4 | ||||||||
| 1 | NCP250B | A, B, CX, R | 48.5 | 28.5 | 19.15 | — | 7.35 | 15 | 2 | — | 1.3 | 2.8 | 2.4 |
| 2 | D, E90, F, G90, GX, H, K, KX | 8.35 | — | 2.3 | |||||||||
| 3 | J | 4.95 | 3.4 | 2.5 | 1.4 |
Related Products
-
Maxpull Series motor winch GLF series
-
Kamiuchi Circular rail traveling crane Specialized Cranes
-
NAGANO KEIKI CD75 Construction Pressure Switch
-
Organo Vertical Shaft Mechanical Aeration System for Orlotor System Oxidation Ditch
-
BIX BD-4M/BD-4X Small Electric Driver Bits
-
Sankei Engineering NCP10LP – NCP20LB Probe with Long-Shaft Bushing
REQUEST QUOTATION
PAYMENT
LINK
