Sanshin NEW Autosand Rapid sand filter

Manufacturer: Sanshin Manufacturing Co., Ltd
Model:  W3FS

This sand filter is ideal for wastewater filtration, using sand as the filter medium to capture suspended solids (SS). It removes trace amounts of heavy metal suspended solids and fine floating matter contained in wastewater to below regulated values, stabilizing the quality of the treated water.

Features

  • The patented circuit automatically performs the backwash operation reliably and stably, ensuring the permanent use of the filler media.
    It operates fully automatically regardless of fluctuations in the raw water flow rate, so you can operate it with peace of mind, ensuring that you always receive reliable treated water quality.

  • The installation area is small and the unit is modularized to facilitate easy installation work.
  • Depending on the composition of the raw water quality, an air backwash mechanism can be installed.
  • In particular, for wastewater from metal surface treatment plants, where water quality is unstable and difficult to treat, this system can reliably filter out trace amounts of heavy metal hydroxides and minute suspended solids, stabilizing the treated water quality to below the regulated value.
  • As a closed system device, it is also effective when combined with pretreatment devices such as COD removal, RO, and ion exchange.

Sanshin

Applications

  • Finishing filtration of wastewater from surface treatment processes
  • Pretreatment for tertiary treatment process
  • Water and wastewater filtration

Standard Specifications

ModelW3FS-120N2W3FS-150N2W3FS-200N2
Standard Filtration Volume8m3 / h12m3 / h22m3 / h
Filter body
[Outer diameter (φ) x height (total length)]
1,200×7,350mm1,500×7,350mm2,000×7,350mm
Backflow volume *13.6m35.5m39.1m3
Pipe dimensions Inlet40A50A65A
Pipe dimensions Outlet50A65A80A
Piping dimensions Backwash port125A150A200A
Piping dimensions Backwash drain16A20A20A
Standard material bodySS + Inner surface epoxy resin finish,
outer surface painted finish N-6.0
SS + Inner surface epoxy resin finish,
outer surface painted finish N-6.0
SS + Inner surface epoxy resin finish,
outer surface painted finish N-6.0
Standard material Piping valveSS and FCSS and FCSS and FC
Weight3.8t5.5t9.8t
Operating Weight8.8t13.2t23.3t
ModelW3FS-250N2
Standard Filtration Volume34m3 / h
Filter body
[Outer diameter (φ) x height (total length)]
2,500×7,350mm
Backflow volume *113.5m3
Pipe dimensions Inlet80A
Pipe dimensions Outlet100A
Piping dimensions Backwash port300A
Piping dimensions Backwash drain25A
Standard material bodySS + Inner surface epoxy resin finish,
outer surface painted finish N-6.0
Standard material Piping valveSS and FC
Weight15.2t
Operating Weight36.2t

*1: Reference value

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top