Sanwa Supply CHE-WD2 Cup Type Anemometer

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-WD2

Stable measurement is possible even if the wind direction suddenly changes !

Cup type anemometer

It is a digital anemometer with a temperature measurement function that uses a cup type. Stable measurement is possible even if the wind direction suddenly changes. Since the temperature can be checked when measuring the wind speed, it can be used for wind power measurement in a wide range of fields such as outdoor events, sports competitions, golf, windsurfing, work sites, agriculture, and fishing.
In addition, since it is dust-proof and drip-proof IP54, it can be used outdoors with peace of mind.

Cup type that can respond to changes in wind direction

This product uses a cup-type measurement method. Stable measurement is possible even if the wind direction suddenly changes.
Equipped with a temperature measurement function, you can also check the temperature when measuring the wind speed.

IP54 dustproof and drip-proof performance

It is dust-proof and drip-proof IP54, so you can use it outdoors with confidence.

Equipped with a backlit display

It is equipped with a display that allows you to check the measured values ​​immediately, and has a backlight function that makes it easy to see the display even in dark places.

With tripod fixing hole

It has a tripod fixing hole (1/4 inch screw) and can be used by fixing it to a tripod.

Power supply is AAA dry cell x 3

This product runs on 3 AAA batteries. Since it is battery-powered, it is ideal for outdoor installation where it is difficult to secure a power source.

Equipped with a battery level display function

It is equipped with a battery level display function. Since the remaining battery level is displayed as an icon, it is easy to understand the guideline for battery replacement. You can also set the auto power off function, which automatically turns off the power if you do not use it for about 15 minutes.

With a storage case that is convenient to carry

Comes with a storage case that can be passed through the belt. Since the product itself is small, it has excellent portability.

Features of CHE-WD2

A cup-type anemometer that can perform stable measurements even if the wind direction suddenly changes.

When measuring the wind speed, you can also check the temperature.

It can be used for wind measurement in a wide range of fields such as outdoor events, sports competitions, golf, windsurfing, work sites, agriculture, and fishing.

Obtained dust-proof and drip-proof IP54, it can be used outdoors with peace of mind.

It has a backlight function that makes it easy to see the display even in the dark.

With a tripod fixing hole (1/4 inch screw), it can be used with a tripod.

It has an auto power off function that automatically turns off the power if it is not used for about 15 minutes. The auto power off function can also be canceled.

When the battery is low, the battery level icon will be displayed to inform you that the battery has been replaced.

Specifications

Range of measurement Wind speed / 0.7-30.0m / s
Temperature / -20 ℃ -60 ℃
Measurement accuracy Wind speed / ± (3% + 0.3m / s)
Temperature / ± 1.5 ℃
Resolution Wind speed / 0.1m / s
temperature / 0.1 ℃
Switchable measurement unit m / s, km / h
Dust-proof and drip-proof IP54
Operating conditions -20 ℃ ~ 60 ℃, 10% RH ~ 90% RH
Preservation conditions -20 ℃ ~ 60 ℃, 10% RH ~ 75% RH
Battery life About 60 hours
Power supply 3 AAA batteries
Size W58 × D48 × H150.5mm
Weight About 123g
Function Backlit color LCD display, wind speed and temperature measurement, maximum / minimum value recording, unit (m / s, km / h) switching, battery level display function, automatic power off function (about 15 minutes, can be canceled) )
Set Anemometer, AAA batteries (for testing) x 3, storage case, instruction manual / warranty card

 


Other items of Sanwa Supply

Request the quotation for Sanwa Supply

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top