Seiwa Electric MFG. Co.
Seiwa E01J Mounting Finger – E01JC Edge Finger
Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: E01J
E01J – Automatic Mounting Finger
Product Outline and Features
• There are extensive size variation.
• Since the fingers are on embossed carrier tape, they can be used in an automatic mounting line.
Specifications
| Part No. | Initial Height (mm) | Width (mm) | Length (mm) | Materials 〔Following〕 | Qty. of Reel (ReelDia.) | Recommended use range compression (mm) |
| E01J8025P | 8.0 | 2.5 | 7.0 | ① | 1300（∅380） | 5.5〜7.2 |
| E01J6022P | 6.0 | 2.2 | 5.2 | ① | 1800（∅380） | 3.5〜5.4 |
| E01J4032Y | 4.0 | 3.2 | 4.0 | ② | 2000（∅330） | 2.8〜3.6 |
| E01J3028Y | 3.0 | 2.8 | 5.0 | ② | 2500（∅330） | 2.1〜2.6 |
| E01J3022Y | 3.0 | 2.2 | 2.8 | ② | 2500（∅330） | 2.2〜2.6 |
| E01J2024Y | 2.0 | 2.4 | 4.5 | ② | 5000（∅330） | 1.4〜1.8 |
| E01J1511Y | 1.5 | 1.1 | 3.0 | ② | 5000（∅330） | 1.15〜1.35 |
| E01J1113Y | 1.1 | 1.3 | 3.0 | ② | 5000（∅330） | 0.65〜0.9 |
Materials
①： Phosphor Bronze for spring
[Ni (whole surface) / Au plating (contact and solder surfaces)]
②： Titanium Copper
[Ni (whole surface) / Au plating (contact and solder surfaces)]
| E01J8025P | E01J3022Y |
 |  |
| E01J6022P | E01J2024Y |
 |  |
| E01J4032Y | E01J1511Y |
 |  |
| E01J3028Y | E01J1113Y |
 |  |
Recommended use range compression
E01JC – Edge Finger
Product Outline and Features
• Space saving method by adopting clip.
• The D-lance permits secure fixing.
Mounting
Specifications
| Part No. | Materials | Thickness (mm) | Surface Finish | Plate Thickness (mm) |
| E01 JC01E | Titanium Copper Alloy | 0.1 | Ni Plating （0.5～1.0μm） | 1.6 |
