Japan, Shimizu
Shimizu Camel Cold Chisel – Tip Tool
Made in Japan
Manufacturer: Shimizu Manufacturing Co., Ltd
Features
The camel cold chisel has original special alloy tool steel joined to the tip by friction welding. In addition, the shank is made of structural alloy steel, and is evenly heat-treated and shot-peened so that the impact is fully transmitted to the cutting edge. If it wears out, it can be polished with a normal whetstone. Forging is also possible in the same way as for ordinary products. Be sure to use oil for quenching.
*Excluding SDS-plus – SDS-plus uses chrome vanadium steel
Usage
- Concrete chipping and chamfering
- Concrete cornering, grooving and grooving
17H Cold Chisel
| part number | size | JAN code |
| 10007 | 17H x 280mm | 402013 |
| 10008 | 17H x 365mm | 402020 |
| 10009 | 17H x 450mm | 402037 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
21H Cold Chisel
| part number | size | JAN code |
| 10010 | 21H x 320mm | 402044 |
| 10011 | 21H x 450mm | 402051 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
30H (8900N) Cold Chisel
| part number | size | JAN code |
| 10012 | 30H x 420mm | 402068 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
30H (8600N) Cold Chisel
| part number | size | JAN code |
| 10013 | 30H x 310mm | 402075 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
SDS-max Cold Chisel
| part number | size | JAN code |
| 10064 | 18Φ×280mm | 401136 |
| 10065 | 18Φ×450mm | 401143 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
SDS Plus Cold Chisel
| part number | size | JAN code |
| 10133 | 10Φ×250mm | 402150 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Related Products
-
Tanitec Laser Beam Saw
-
UHT CORPORATIO #600 Pink New Soft Lap
-
Nippon TA Hand-Finished Surface Roughness Standard Plate
-
Gentos DK-R170WH Wide Beam Desk Light (650 lumens)
-
Chiyoda Seiki SGX-20N Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)
-
Asahi Bagnall 2 STAIRS Cable Carrier
REQUEST QUOTATION
PAYMENT
LINK
