Suntes
Suntes DB-5520YF Hydraulic disc brake
Manufacture: Suntes (Sanyo Shoji Co., Ltd.)
Model: DB-5520YF
Model code
Dimensions
Specification
| Hydraulic pressure used(MPa) | 13.2 to 16.7 |
|---|---|
| Required oil amount *1 ( cm3 ) | 39.0 (19.5) |
| Disk outer diameter(mm) | φ1170～∞ |
| Effective Braking Radius(m) |  -75 |
| Pad Type | DB-0450 |
| Pad Effective Wear Allowance(mm) | 3.0 |
| Pad Friction Coefficient(μ) | Dynamic: 0.38 Static: 0.30 *2 |
| Hydraulic oil | Mineral oil (equivalent to ISO VG32) |
| mass(kg) | 134(125) |
( ) indicates single pot
Air gap 1mm on each side.
When using new pads, please break them in to obtain the required brake torque.
The friction coefficient in the specifications column is the value after breaking in.
Pressing force
Torque calculation T = 2 x μ x F x r
T: Torque (Nm)
μ: Pad friction coefficient
F: Pressing force (N)
r: Effective braking radius (m)
Special support
Floating type is also available for double pot type.
Electroless nickel plating is available as an anti-rust measure.
Please consult us if you plan to use fire-resistant hydraulic oil (water/glycol-based, etc.).
If you have any questions about specifications, please contact us.
The dimensions and specifications listed may be changed without notice for improvement purposes.
