The operator can tighten the clamp directly from their side—for the first time in the clamp industry!
In case of overhead beam:
Clamp, Japan, Lifting, Super Tool
Super Tool SSC0 Series Screw Cam Clamp
Product Made in Japan
Manufacturer: Super Tool
Model: SSC0 Series : SSC0.5N/1N/2N
*Place the steel plate or steel beam directly near or on the floor when neede
Features
Most suitable for lifting down a chain block/hoist structured steels and horizontally pulling structured steels.
When pulling horizontally, the operator can easily tighten the screw from the top while installing it onto an overhead beam.
Attention: Tightening torque of the screw should be more than 25N・m (Abt.250kgf・cm).
* Note: Do not use the SSCN Clamp for products with the shapes shown below.
Specifications
| Material | Special Alloy Steel |
|---|---|
| Finish | Champagne gold paint |
| Product Specifications | Capacity: 0.5 / 1 / 2ton |
| Product Specifications | Clamp Range: 0～25 / 0～40mm |
| Product Specifications | Attachment: 17×21 Double Ratchet Wrench (Short Type) |
Dimension Table
| Item No. | Capacity (ton) | Clamp range | L | L2 | H | H1 | H2 | H3 | ΦD1 | T1 | T2 | S | N.W. (kg) |
| SSC0.5N | 0.5 | 0~25 | 122 | 89 | 129.5 | 68 | 30 | 39 | 22 | 46 | 16 | 21 | 1.8 |
| SSC1N | 1 | 0~40 | 156 | 121 | 161 | 88 | 40 | 45 | 26 | 50 | 18 | 21 | 3.2 |
| SSC2N | 2 | 0~40 | 170 | 121 | 186 | 100 | 40 | 53 | 32 | 60 | 28 | 21 | 5 |
Related Products
-
Kondotec Slab Receiver
-
Shinano SI-2201/SI-2201-2 With 2″Pad Model Disc Sander
-
YOSHITAKE GP-1010S Pressure Reducing Valve – Steam
-
Vessel No.220W-3 Ball-Grip Interchangeable Screwdriver Set
-
Kyowa Automatic Three Way Ball Valves
-
Royal Master M-3SW-4 / M-2SW-4 / M-1SW-4 Hydraulic Pump Units With Manual Changeover Valves – Hydraulic Pump Units With Manual Changeover Valves
