Japan, Taiyo Parker
TAIYO DP Series Hydraulic (Tie-Rod Type High-TemperatureeCylinder)

Made in japan
Manufacturer: TAIYO
Model: DP Series
Feature:
It could puncture round hole and square hole without any guide.
The external size is samll, so it could saving space for lined up installation.
It could setting the punch directly on the rod end.
The length of stroke is possible to puncture depth concave under face.
Specification:
Action Style | Basic | With Non-rotating |
---|---|---|
Model Numbers | DPR | DPS |
Aailable Bores(mm) | φ26,φ40,φ50 | φ40,φ50 |
Cylinder Stroke | 30/50/75/100/125/150mm | 30/50/75/100/125/150mm |
Max. Allowable Pressure | 14MPa | |
Min. Working Pressure | 0.6MPa | |
Operating Temperature | -10 to +80 Celsius Degree(But do not use when frozen) When using exceeds this temperature, the gaskets are damaged. | |
Working Fluid | Petroleum-based fluid | |
Note1)Rot End Run-out | less than 0.05mm | less than 0.03mm |
Remarks | Rotation Run-out/less than 0.03mm (The run-out of rod diameter when rotate without load.) | Rotation Angle/less than 0.3 Degree (Without Torque) |
Adjustment | Round Hole | Square Hole/Different Diameter Hole |
Accessories | One set screw for retainer-nut. | One set screw for retainer-nut./One Spring Pin |
Related Products
-
LOBTEX HFR45 Flaring Roller
-
Okazaki Seiko SPSEE4VA Coated Solid Carbide Vibration-proof Endmills (4 Flutes)
-
SAKUSAKU RFSS-35D 20.0 Carbide Roughing End Mill 4 Flute
-
UHT Corporation PZ-ROBO N2 Series Punching Machine For Flexible Substrates
-
KONAN TA2 Series Rotary Actuator With Limit Switch Box Single-Acting Type
-
Kondotec Water Expansion Water Stop Plate