Taseto
TASETO RNY Series Covered Electrodes
Product Made In Japan
Manufacturer: Maiko Shokai
Model: RNY Series
Trade Name | Certification | |
---|---|---|
JIS | AWS | |
RNY308 | JIS Z 3221 ES308-16 | AWS A5.4 E308-16 |
RNY308HT | JIS Z 3221 ES308H-16 | AWS A5.4 E308H-16 |
RNY308L | JIS Z 3221 ES308L-16 | AWS A5.4 E308L-16 |
RNY308LA | JIS Z 3221 ES308L-16 | AWS A5.4 E308L-16 |
RNY309 | JIS Z 3221 ES309-16 | AWS A5.4 E309-16 |
RNY309L | JIS Z 3221 ES309L-16 | AWS A5.4 E309L-16 |
RNY309Mo | JIS Z 3221 ES309Mo-16 | AWS A5.4 E309Mo-16 |
RNY309MoL | JIS Z 3221 ES309LMo-16 | AWS A5.4 E309LMo-16 |
RNY310 | JIS Z 3221 ES310-16 | AWS A5.4 E310-16 |
RNY312 | JIS Z 3221 ES312-16 | AWS A5.4 E312-16 |
RNY316 | JIS Z 3221 ES316-16 | AWS A5.4 E316-16 |
RNY316L | JIS Z 3221 ES316L-16 | AWS A5.4 E316L-16 |
RNY316LA | JIS Z 3221 ES316L-16 | AWS A5.4 E316L-16 |
RNY317L | JIS Z 3221 ES317L-16 | AWS A5.4 E317L-16 |
RNY329J3L | JIS Z 3221 ES2209-16 | AWS A5.4 E2209-16 |
RNY329J4L | JIS Z 3221 ES329J4L-16 | AWS A5.4 E2594-16 |
RNY2595 | JIS Z 3221 ES329J4L-16 | AWS A5.4 E2595-16 |
RNY347 | JIS Z 3221 ES347-16 | AWS A5.4 E347-16 |
RNY347HT | JIS Z 3221 ES347-16 | AWS A5.4 E347-16 |
RNY347L | JIS Z 3221 ES347L-16 | AWS A5.4 E347-16 |
RNY308
-
Applicable Specification
- JIS Z 3221 ES308-16
AWS A5.4 E308-16 -
Identification Color
- End Face: Yellow
Side Face:- -
Applications and Characteristics
- TASETO RNY308 is the electrode designed for Type 304 stainless steel. RNY308 is a lime-titania type covered electrode suitable for positional welding
-
Notes on Usage
- Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
Remove oil and dust from the surface to be welded.
Use welding current as low as possible to reduce intergranular corrosion. -
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.057 | 0.46 | 1.34 | 0.023 | 0.005 | 9.90 | 19.98 | 0.09 | 0.12 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | Absorbed Energy at 20℃ (J) | |
---|---|---|---|
Typical | 610 | 43.2 | 103 |
-
Typical Mechanical Properties of All Weld Metal in Elevated Temperatures
Temperature (℃) | Tensile Strength (MPa) |
---|---|
550 | 372 |
650 | 308 |
725 | 234 |
800 | 173 |
-
Other Properties of All Weld Metal
- * Typical Ferrite Content: 7.3% (Schaeffler’s Diagram)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
3.2 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY308HT
-
Applicable Specification
- JIS Z 3221 ES308H-16
AWS A5.4 E308H-16 -
Identification Color
- End Face: Yellow
Side Face: White -
Applications and Characteristics
- TASETO RNY308HT is the electrode developed to limit the ferrite content of all weld metals to 3~8% and improve the mechanical properties at elevated temperatures. It is used for welding Type 304H for high-temperature service. The crack resistibility of its weld metal is good.
RNY308HT is a lime-titania type covered electrode suitable for positional welding -
Notes on Usage
- Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
Remove oil and dust from the surface to be welded. - Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.050 | 0.49 | 1.58 | 0.027 | 0.005 | 10.14 | 19.53 | 0.07 | 0.12 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 440 | 584 | 41.0 |
-
Typical Mechanical Properties of All Weld Metal in Elevated Temperatures
Temperature (℃) | 0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) |
---|---|---|---|
550 | 239 | 372 | 28.7 |
650 | 211 | 271 | 29.3 |
700 | 181 | 231 | 43.3 |
750 | 152 | 189 | 61.7 |
-
Typical Creep Rupture Strength (700℃, MPa)
1,000h | 5,000h | 10,000h |
---|---|---|
94 | 71 | 63 |
-
Other Properties of All Weld Metal
- Typical Ferrite Content: 4.5% (DeLong’s Diagram)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY308L
-
Applicable Specification
- JIS Z 3221 ES308L-16
AWS A5.4 E308L-16 -
Identification Color
- End Face: Red
Side Face:- -
Applications and Characteristics
- TASETO RNY308L is designed for welding of Type 304L, with excellent intergranular corrosion resistance by suppressing the carbon content in all weld metal. This electrode is suitable for welding of corrosion-resistant containers where solution heat treatment is impracticable.
RNY308L is a lime-titania type electrode and is applicable for positional welding. -
Notes on Usage
- * Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
Remove oil and dust from the surface to be welded. -
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.030 | 0.52 | 1.58 | 0.021 | 0.006 | 9.92 | 19.05 | 0.11 | 0.11 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | Absorbed Energy at 20℃ (J) | |
---|---|---|---|
Typical | 571 | 43.0 | 103 |
-
Typical Mechanical Properties of All Weld Metal in Elevated Temperatures
Temperature (℃) | Tensile Strength (MPa) |
---|---|
550 | 336 |
650 | 279 |
725 | 220 |
800 | 200 |
-
Other Properties of All Weld Metal
- * Typical Ferrite Content: 7.0% (Schaeffler’s Diagram)
* 65% Nitric Acid Test: max. 0.001 in/month
* Copper Sulfate-Sulfuric Acid Test: No defects after Bending (650℃×2h PWHT) -
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY308LA
-
Applicable Specification
- JIS Z 3221 ES308L-16
AWS A5.4 E308L-16 -
Identification Color
- End Face: Red
Side Face: Black -
Applications and Characteristics
- TASETO RNY308LA is designed to suppress the ferrite content in weld metal with excellent low-temperature impact strength.
It is used for welding equipment for extra low-temperature environments including liquid hydrogen, liquid nitrogen, and liquid helium.
RNY308LA is a lime-titania type electrode suitable for positional and its weld metal has good hot cracking resistibility. -
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
Remove oil and dust from the surface to be welded.
Keep interpass temperature at 120℃ or less.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.027 | 0.33 | 1.725 | 0.018 | 0.006 | 11.29 | 19.70 | 0.09 | 0.10 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 413 | 568 | 40.1 |
-
Impact Properties of All Weld Metal
Absorbed Energy (J) | Lateral Expansion (mm) | |||
---|---|---|---|---|
20°C | -100°C | -196°C | -196°C | |
Typical | 113 | 67 | 48 | 0.83 |
-
Other Properties of All Weld Metal
- * Typical Ferrite Content: 3.6% (Schaeffler’s Diagram)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY309
-
Applicable Specification
- JIS Z 3221 ES308-16 AWS A5.4 E308-16
-
Identification Color
- End Face: Yellow Side Face:-
-
Applications and Characteristics
- TASETO RNY308 is the electrode designed for Type 304 stainless steel. RNY308 is a lime-titania type covered electrode suitable for positional welding
-
Notes on Usage
- Dry the electrode at 150℃ to 200℃ for 60 minutes before use. Remove oil and dust from the surface to be welded. Use welding current as low as possible to reduce intergranular corrosion.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.065 | 0.47 | 1.70 | 0.025 | 0.006 | 13.61 | 24.50 | 0.18 | 0.12 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | – | |
---|---|---|---|
Typical | 597 | 40.4 | – |
Other Properties of All Weld Metal
- * Typical Ferrite Content: 7.7% (Schaeffler’s Diagram)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY309L
-
Applicable Specification
- JIS Z 3221 ES309L-16 AWS A5.4 E309L-16
-
Identification Color
- End Face: Yellowish Green Side Face:-
-
Applications and Characteristics
- TASETO RNY309L is the low-carbon type electrode of RNY309 and is suitable for the first layer of low-carbon type stainless steel overlay welding. Also, this electrode provides performance as equal to RNY309 when used in the welding of dissimilar metals and the welding of martensitic and ferritic-type stainless steels such as Type 410 or 430. RNY309L is a lime-titania-type electrode suitable for positional welding.
-
Notes on Usage
- Dry the electrode at 150°C to 200°C for 60 minutes before use. Remove oil and dust from the surface to be welded.
-
Chemical Composition of All Weld Metal (%)
-
C Si Mn P S Ni Cr Mo Cu Typical 0.030 0.47 1.81 0.022 0.006 13.45 23.59 0.35 0.13
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | Absorbed Energy at 20°C (J) | |
---|---|---|---|
Typical | 551 | 41.0 | 106 |
-
Other Properties of All Weld Metal
- * Typical Ferrite Content: 8.3% (Schaeffler’s Diagram)
-
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY309Mo
- Applicable Specification
JIS Z 3221 ES309Mo-16
AWS A5.4 E309Mo-16
- Identification Color
End Face: Silver
Side Face:
Applications and Characteristics
Major uses of TASETO RNY309Mo are the same as RNY309, dissimilar metal joint welding and overlay welding. Especially, RNY309Mo containing about 2.5%Mo, is preferred to apply the first layer of Type 316 stainless steel overlay. RNY309Mo is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
*Dry the electrode at 150°C to 200°C for 60 minutes before use.
*Remove oil and dust from the surface to be welded.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.060 | 0.58 | 1.51 | 0.021 | 0.007 | 13.06 | 24.06 | 2.45 | 0.12 |
-
Typical Mechanical Properties of All Weld Metal in Elevated Temperatures
Temperature (℃) | Tensile Strength (MPa) |
---|---|
550 | 464 |
650 | 384 |
725 | 330 |
800 | 276 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 15.0% (Schaeffler’s Diagram)
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY309MoL
- Applicable Specification
JIS Z 3221 ES309LMo-16
AWS A5.4 E309LMo-16
- Identification Color
End Face: Silver
Side Face: Neutral Green
Applications and Characteristics
TASETO RNY309MoL has the same characteristics as RNY309Mo except low carbon content in all weld metals less than 0.04%. It is particularly suitable for applying the first layer of overlay welding of Type 316L. RNY309MoL is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
*Dry the electrode at 150°C to 200°C for 60 minutes before use.
*Remove oil and dust from the surface to be welded.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.036 | 0.49 | 1.38 | 0.019 | 0.007 | 13.21 | 23.92 | 2.51 | 0.13 |
-
Mechanical Properties of All Weld Metal
Temperature (℃) | Tensile Strength (MPa) |
---|---|
Typical | 677 |
5D Elongation (%) | 33.6 |
Absorbed Energy at 20℃ (J) | 79 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 16.4% (Schaeffler’s Diagram)
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY310
- Applicable Specification
JIS Z 3221 ES310-16
AWS A5.4 E310-16
- Identification Color
End Face: Pink
Side Face: —
Applications and Characteristics
TASETO RNY310 is suitable for welding AISI310 or SUS310S. As RNY310 is specifically designed to reduce the hot cracking susceptibility and embrittlement caused by PWHT, this electrode is also suitable for welding of dissimilar metals where heat treatment is required. RNY310 is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
Avoid excessively high current or wide weaving to prevent hot cracking.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.10 | 0.41 | 2.03 | 0.017 | 0.003 | 20.90 | 26.84 | 0.09 | 0.08 |
-
Mechanical Properties of All Weld Metal
Temperature (°C) | Tensile Strength (MPa) |
---|---|
Typical | 586 |
-
Typical Mechanical Properties of All Weld Metal in Elevated Temperatures
Temperature (°C) | Tensile Strength (MPa) |
---|---|
550 | 407 |
650 | 322 |
725 | 256 |
800 | 198 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 0% (Schaeffler’s Diagram)
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY312
- Applicable Specification
JIS Z 3221 ES312-16
AWS A5.4 E312-16
- Identification Color
End Face: Green
Side Face: Dark Blue
Applications and Characteristics
Since TASETO RNY312 contains a large amount of ferrite, its crack sensitivity is very low in the case of dissimilar welding. This electrode is used for welding stainless steel to carbon steel or to low alloy steel with high carbon content, also welding the first layer of overlay welding on carbon steel or to low alloy steel with high carbon content. RNY312 is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
As all weld metal contains a large amount of ferrite, weld metal is embrittled by severe PWHT.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.065 | 0.54 | 1.45 | 0.018 | 0.006 | 9.12 | 28.39 | 0.11 | 0.12 |
-
Mechanical Properties of All Weld Metal
Temperature (°C) | Tensile Strength (MPa) |
---|---|
550 | 492 |
650 | 405 |
725 | 283 |
800 | 145 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 20.9% (Schaeffler’s Diagram)
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY316
- Applicable Specification
JIS Z 3221 ES316-16
AWS A5.4 E316-16
- Identification Color
End Face: White
Side Face: —
Applications and Characteristics
TASETO RNY316 provides weld metal with good corrosion resistibility against acetic acid, sulfuric acid, phosphoric acid, and chlorides. RNY316 is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
Use a low current to prevent carbides from precipitating in the heat-affected zone.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.056 | 0.59 | 1.59 | 0.024 | 0.006 | 12.60 | 19.50 | 2.30 | 0.11 |
-
Mechanical Properties of All Weld Metal
-
Tensile Strength (MPa) 5D Elongation (%) Absorbed Energy at 20°C (J) Typical 582 40.2 93
-
Typical Tensile Strength of All Weld Metal at High Temperature
Temperature (°C) | Tensile Strength (MPa) |
---|---|
550 | 407 |
650 | 336 |
725 | 271 |
850 | 191 |
-
Typical Creep Rupture Strength of All Weld Metal at High Temperature
650°C x 1,000h: 139 MPa
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 5.2% (Schaeffler’s Diagram)
* Copper Sulfate-Sulfuric Acid Test: No defects after bending 5% Sulfuric Acid Test: max 7 g/m²·h
Sizes Available, Recommended Welding Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY316L
- Applicable Specification
JIS Z 3221 ES316L-16
AWS A5.4 E316L-16
- Identification Color
End Face: Green
Side Face: —
Applications and Characteristics
TASETO RNY316L is the first covered electrode of 18%Cr-12%Ni-2%Mo stainless steel produced in Japan. Because of good resistibility for intergranular corrosion, it is used for welding low carbon (Type 316L) plates or castings for important chemical equipment, which may be omitted post-weld solution heat treatment. RNY316L is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
Remove oil and dust from the surface to be welded.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.031 | 0.55 | 1.58 | 0.023 | 0.006 | 12.80 | 19.43 | 2.38 | 0.13 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | Absorbed Energy at 20°C (J) |
---|---|---|
586 | 42.4 | 100 |
-
Other Properties of All Weld Metal
Typical Ferrite Content: 6.4% (Schaeffler’s Diagram)
Copper Sulfate-Sulfuric Acid Test: No defects after bending (650°C x 2h PWHT)
5% Sulfuric Acid Test : max. 6 g/m²·h
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY316LA
- Applicable Specification
JIS Z 3221 ES316L-16
AWS A5.4 E316L-16
- Identification Color
End Face: Green
Side Face: Black
Applications and Characteristics
TASETO RNY316LA is designed to suppress the ferrite content in weld metal with excellent toughness at low temperatures. It is used for welding equipment for extra low-temperature environments including liquid hydrogen, liquid nitrogen, and liquid helium. RNY316LA is a lime-titania type electrode suitable for positional and its weld metal has good hot cracking resistibility.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
Remove oil and dust from the surface to be welded.
Keep interpass temperature at 120°C or less.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.026 | 0.49 | 1.73 | 0.022 | 0.006 | 13.01 | 18.93 | 2.12 | 0.10 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) |
---|---|
545 | 44.5 |
-
Impact Properties of All Weld Metal
-
Absorbed Energy (J) Lateral Expansion (mm) -196°C -196°C Typical 48 0.83 Other Properties of All Weld Metal
* Typical Ferrite Content: 4.1% (Schaeffler’s Diagram)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY317L
- Applicable Specification
JIS Z 3221 ES317L-16
AWS A5.4 E317L-16
- Identification Color
End Face: Chestnut Color
Side Face: –
Applications and Characteristics
TASETO RNY317L has excellent resistance to pitting and intergranular corrosion. It is used for welding 18%Cr-12%Ni-3%Mo stainless steel (Type 317, 317L), which is used for bleaching equipment. RNY317L is a lime-titania-type electrode suitable for positional welding.
- Notes on Usage
Dry the electrode at 150°C to 200°C for 60 minutes before use.
Remove oil and dust from the surface to be welded.
Avoid excessively high currents to prevent hot cracking.
- Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | |
---|---|---|---|---|---|---|---|---|---|
Typical | 0.034 | 0.63 | 1.62 | 0.011 | 0.009 | 15.91 | 17.82 | 5.13 | 0.13 |
- Mechanical Properties of All Weld Metal
-
Tensile Strength (MPa) 5D Elongation (%) Typical 551 35.4
- Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY329J3L
-
Applicable Specification
JIS Z 3221 ES2209-16
AWS A5.4 E2209-16
-
Identification Color
End Face: Brown
Side Face: –
Applications and Characteristics
TASETO RNY329J3L is used for welding duplex stainless steel such as 2205. It exhibits excellent corrosion resistibility in industrial water containing chlorine ions in small concentrations. Resistibility to stress corrosion cracking and pitting corrosion is excellent too. The hot cracking resistibility of all weld metal is good. RNY329J3L is a lime-titania type electrode of good usability in positional welding.
-
Notes on Usage
* Dry the electrode at 150°C to 200°C for 60 minutes before use.
* Post-weld heat treatment adversely affects embrittlement.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | |
---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.025 | 0.37 | 0.79 | 0.027 | 0.007 | 8.58 | 21.60 | 2.93 | 0.12 | 0.12 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | Absorbed Energy (J) 0℃ |
Absorbed Energy (J) 76℃ |
|
---|---|---|---|---|---|
Typical | 634 | 829 | 24.0 | 80.4 | 43.1 |
-
Other Properties of All Weld Metal
* 5% Sulfuric Acid Test: max. 1 g/m2・h
* 65% Nitric Acid Test: max. 0.5 g/m2・h
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | — |
RNY329J4L
-
Applicable Specification
JIS Z 3221 ES329J4L-16
AWS A5.4 E2594-16
-
Identification Color
End Face: Purple
Side Face: –
Applications and Characteristics
TASETO RNY329J4L is used for welding duplex stainless steel such as SUS329J4L. It exhibits excellent corrosion resistibility in industrial water containing chlorine ions in small concentrations. Resistibility to stress corrosion cracking, pitting corrosion, and seawater corrosion is excellent more than RNY329J3L. The hot cracking resistibility of all weld metal is good. RNY329J4L is a lime-titania type electrode of good usability in positional welding.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Post-weld heat treatment adversely affects embrittlement.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | W | |
---|---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.027 | 0.47 | 0.64 | 0.015 | 0.007 | 8.23 | 25.68 | 3.15 | 0.28 | 0.13 | 0.02 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 590 | 815 | 25.0 |
-
Other Properties of All Weld Metal
* 5% Sulfuric Acid Test: max. 2 g/m2・h
* 65% Nitric Acid Test: max. 0.001 in/month (0.5g/m2・h)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50-90 | 45-80 |
3.2 | 350 | 80-120 | 65-110 |
4.0 | 350 | 110-150 | 85-135 |
5.0 | 350 | 150-200 | — |
RNY2595
-
Applicable Specification
JIS Z 3221 ES329J4L-16
AWS A5.4 E2595-16
-
Identification Color
End Face: Purple
Side Face: –
Applications and Characteristics
TASETO RNY2595 is used for welding of super duplex stainless steel such as UNS S32760. It exhibits excellent corrosion resistibility in industrial water containing chlorine ions in small concentrations. Resistibility to stress corrosion cracking, pitting corrosion, and seawater corrosion is excellent too. The hot cracking resistibility of all weld metal is good. RNY2595 is a lime-titania type electrode of good usability in positional welding.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Post-weld heat treatment adversely affects embrittlement.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | W | |
---|---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.033 | 0.58 | 0.74 | 0.021 | 0.002 | 9.46 | 25.13 | 3.98 | 0.53 | 0.24 | 0.58 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 737 | 923 | 22.0 |
-
Other Properties of All Weld Metal
* 6% Ferric Chloride Test: No pitting at 35℃×24h
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |
RNY347
-
Applicable Specification
JIS Z 3221 ES347-16
AWS A5.4 E347-16
-
Identification Color
End Face: Blue
Side Face: –
Applications and Characteristics
Since TASETO RNY347 has excellent resistibility to intergranular corrosion in polythionic acid conditions of desulfurization plant, because of the carbon stabilizing effect of Nb added in weld metal. It is used for welding of Type 347 and Type 321 stabilized stainless steel. RNY347 is a lime-titania type electrode suitable for all position welding.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Since Nb is added, crack sensitivity is high. Thus avoid excessively high current or excessively rapid weaving.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | |
---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.042 | 0.52 | 1.57 | 0.023 | 0.005 | 9.63 | 19.22 | 0.07 | 0.06 | 0.70 |
-
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|
Typical | 600 | 41.0 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 8.2% (Schaeffler’s Diagram)
* 65% Nitric Acid Test: max. 0.001 in/month, max. 0.0025 in/month (650℃×2h, AC)
* Copper Sulfate-Sulfuric Acid Test: No defects after bend (650℃×2h PWHT)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |
RNY2595
-
Applicable Specification
JIS Z 3221 ES329J4L-16
AWS A5.4 E2595-16
-
Identification Color
End Face: Purple
Side Face: –
Applications and Characteristics
TASETO RNY2595 is used for welding of super duplex stainless steel such as UNS S32760. It exhibits excellent corrosion resistibility in industrial water containing chlorine ions in small concentrations. Resistibility to stress corrosion cracking, pitting corrosion, and seawater corrosion is excellent too. The hot cracking resistibility of all weld metal is good. RNY2595 is a lime-titania type electrode of good usability in positional welding.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Post-weld heat treatment adversely affects embrittlement.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | W | |
---|---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.033 | 0.58 | 0.74 | 0.021 | 0.002 | 9.46 | 25.13 | 3.98 | 0.53 | 0.24 | 0.58 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 737 | 923 | 22.0 |
-
Other Properties of All Weld Metal
* 6% Ferric Chloride Test: No pitting at 35℃×24h
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |
RNY347
-
Applicable Specification
JIS Z 3221 ES347-16
AWS A5.4 E347-16
-
Identification Color
End Face: Blue
Side Face: –
Applications and Characteristics
Since TASETO RNY347 has excellent resistibility to intergranular corrosion in polythionic acid conditions of desulfurization plant, because of the carbon stabilizing effect of Nb added in weld metal. It is used for welding of Type 347 and Type 321 stabilized stainless steel. RNY347 is a lime-titania type electrode suitable for all position welding.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Since Nb is added, crack sensitivity is high. Thus avoid excessively high current or excessively rapid weaving.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | |
---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.042 | 0.52 | 1.57 | 0.023 | 0.005 | 9.63 | 19.22 | 0.07 | 0.06 | 0.70 |
-
Mechanical Properties of All Weld Metal
C | Tensile Strength (MPa) | 5D Elongation (%) |
---|---|---|
Typical | 600 | 41.0 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 8.2% (Schaeffler’s Diagram)
* 65% Nitric Acid Test: max. 0.001 in/month, max. 0.0025 in/month (650℃×2h, AC)
* Copper Sulfate-Sulfuric Acid Test: No defects after bend (650℃×2h PWHT)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |
RNY347HT
-
Applicable Specification
JIS Z 3221 ES347-16
AWS A5.4 E347-16
-
Identification Color
End Face: Blue
Side Face: White
Applications and Characteristics
TASETO RNY347HT is the electrode developed to keep the ferrite content in its all-weld metal at 3% to 7% and improve the performance (resistance to creep rupture) in elevated temperatures. It is used for welding of Type 347 stainless steel. RNY347HT is a lime-titania-type electrode suitable for all-position welding.
-
Notes on Usage
Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
Remove oil and dust from the surface to be welded.
Use welding current as low as possible to reduce intergranular corrosion.
-
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | |
---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.056 | 0.48 | 1.72 | 0.028 | 0.002 | 9.87 | 19.21 | 0.08 | 0.05 | 0.61 |
-
Mechanical Properties of All Weld Metal
0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) | |
---|---|---|---|
Typical | 508 | 612 | 40.2 |
-
Typical Mechanical Properties of All Weld Metal at High Temperatures
Temperature (℃) | 0.2% Proof Stress (MPa) | Tensile Strength (MPa) | 5D Elongation (%) |
---|---|---|---|
550 | 340 | 425 | 18.6 |
650 | 311 | 395 | 18.2 |
700 | 304 | 357 | 18.8 |
-
Typical Creep Rupture Strength at High Temperatures
Temperature (℃) × Time (hours) | Creep Rupture Strength (MPa) |
---|---|
550 × 1,000 | 232 |
650 × 1,000 | 179 |
-
Other Properties of All Weld Metal
* Typical Ferrite Content: 5.3% (Schaeffler’s Diagram)
-
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |
RNY347L
-
Applicable Specification
JIS Z 3221 ES347L-16
AWS A5.4 E347-16
-
Identification Color
End Face: Blue
Side Face: Blue
Applications and Characteristics
TASETO RNY347L has the same uses as RNY347. As it contains less carbon than RNY347, the resistibility to intergranular corrosion is better than RNY347. RNY347L is suitable for overlay welding of Type 347 stainless steel.
-
Notes on Usage
* Dry the electrode at 150℃ to 200℃ for 60 minutes before use.
* Since Nb is added, hot cracking sensitivity is high. Thus avoid excessively high current or excessively rapid weaving.
Chemical Composition of All Weld Metal (%)
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | |
---|---|---|---|---|---|---|---|---|---|---|
Typical | 0.031 | 0.45 | 1.59 | 0.020 | 0.004 | 9.72 | 19.30 | 0.08 | 0.06 | 0.50 |
Mechanical Properties of All Weld Metal
Tensile Strength (MPa) | 5D Elongation (%) |
---|---|
584 | 40.8 |
Other Properties of All Weld Metal
* Typical Ferrite Content: 8.5% (Schaeffler’s Diagram)
* 65% Nitric Acid Test: max. 0.001 in/month
* Copper Sulfate-Sulfuric Acid Test: No defects after bend (650℃×2h PWHT)
Sizes Available, Recommended Currents (AC or DCEP)
Size (mm) | Length (mm) | Welding Current (A) | |
---|---|---|---|
Flat | Vertical, Overhead | ||
2.6 | 300 | 50~90 | 45~80 |
3.2 | 350 | 80~120 | 65~110 |
4.0 | 350 | 110~150 | 85~135 |
5.0 | 350 | 150~200 | - |