Three S Co.Ltd
Three S X Wired Wire Driven Positioner
Manufacturer: Three S Co., Ltd.
Model : X wired
Rotary Motion
Linear Motion
Features
- Feedback from Wire Connection
- Isolate Positioner from Vibration and/or High Temperature
- Preeminent Vibration Resistance ( 10G – 1000 Hz)
- Flexible Installation Style
- Separate from Actuator
- Lienar / Rotary Selectable by Simple Mounting Kit
Specifications
XE
| Items | Single / Double |
|---|---|
| Input Signal / Input Resistance | Standard 4~20 mA / 250 Ω (1/2 Split range available) |
| Supply Air Pressure | 0.14~0.70 MPa |
| Stroke / Angle | Linear: 20~100 mm Rotary: Lever Angle 60~90 deg. |
| Air Connection | Standard: Rc 1/4 Option: 1/4 NPT |
| Cable Entry Conduit | Conduit method or Pressure-tight packing method |
| *1 Pressure Gauge (Output Pressure) | Standard: 0.2 MPa / 0.4 MPa / 1.0 MPa Option: kPa, psi, bar |
| Enclosure Protection | Standard: IP65 (IEC529-1989) |
| Housing Construction | non-Explosion Proof Flameproof: Exd IIB T6 Flapper H2: Exd IIB+H2 T6 |
| Cam | Linear Characteristics |
| Ambient Temperature | Standard: -20~83°C (Flameproof: -20~60°C) Low Temp.: -50~60°C High Temp.: 0~100°C |
| Material | Body: Aluminium Die-casting Cover: Standard: PBT resin with Glass Fiber Option: Aluminium Die-casting |
| Accuracy | ±2 % (Depends on length of wire, installation angle, and wire bending radius) |
| Air Consumption | 10 NI/min (@SUP: 0.4 MPa) |
| Flow Capacity | 370 NI/min (@Orifice ɸ5mm / max. venting) |
XP
| Items | Single | Double |
|---|---|---|
| Input Signal (Pressure) | Standard: 20~100 kPa (1/2 Split range available) | |
| Supply Air Pressure | 0.14~0.70 MPa | |
| Stroke / Angle | Linear: 20~100 mm Rotary: Lever Angle 60~90 deg. | |
| Air Connection | Standard: Rc 1/4 (Rc 1/8 for Gauges) Option: 1/4 NPT (1/8 NPT for Gauges) | |
| Pressure Gauge (Output Pressure) | Standard: 0.2 MPa / 0.4 MPa / 1.0 MPa Option: kPa, psi, bar | |
| Housing Construction | Non-Explosion Proof | |
| Cam | Standard: Linear Characteristics Option: non-Linear Characteristics | |
| Ambient Temperature | Standard: -20~83°C Low Temp.: -50~60°C High Temp.: 0~100°C | |
| Mass | Approx. 1.3 kg | Approx. 1.4 kg |
| Housing Material | Body: Aluminium Die-casting Cover: Standard: PBT resin with Glass Fiber Option: Aluminium Die-casting | |
*1 kPa, psi and bar units shall be investigated.
* Supply air should be dry (dew point under than -30℃) and clean.
* Air filter (smaller than 5μm) shall be placed just precading of supply port.
Wire System
Notation Table
