Japan, Tohnichi
Tohnichi ATG/BTG(-S) Torque Gauge
Made in Japan
Manufacturer: Tohnichi
Model: ATG/BTG(-S)
Tohnichi has released a torque gauge series for very small torque measurements (from 0.5mN•m to 150cN•m).
ATG6CN [L’=89(mm)]
BTG36CN [L’=119(mm)]
Application
Measurement, inspection and tightening of very small torque.
Features
- Bi-directional operation handy type torque gauge.
- Tip equipped with 3-jaw chuck.
- Push lock button helps to fix the clamp easily.
- The dial is scaled by 270 degrees with a stopper which prevents over-loading.
- For calibration, ATGTCL is available for ATG, and BTGTCL for BTG.
- Side scale ensures excellent visibility.
- Also available: Models with top memory pointer in C scale (option) (See dimension drawing.)
- * Note: Except ATG045CN
Specifications
Notes:
1. ATG045CN needs only a very small torque, so no side memory pointer.
No top memory pointer option setting available.
2. Aluminum cover and steel chuck are standard for both ATG and BTG models. Resin cover and chuck are available as an option.
3. When measuring with the ATG/BTG (-S), be sure to clamp at least 10mm of the object to be measured inside the chuck.
Dimensions
Related Products
-
Chiyoda Seiki EX-100-TD Excellent For Corrosive Gas, Inner Surface Special Coating (Primary pressure: 20.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
Kakuta Variclamp No.2SB Hold Down Clamp
-
Flex System Amenity Step Adhere Type (Resin Fixed Type)
-
TAIYO Construction Machinery Transportation
-
TONE 271 Ratchet Handle
-
Eagle Jack (Konno Corporation) ED-40C-PG-75H-40 Hydraulic Bottle Jack
