A control motor is compact and low-priced, maintaining the same lifespan and performance as conventional products.
Special timing, painting, potentiometers, etc., can be customized by special order.
Ideal for use as damper and valve operating devices in explosion-proof areas.
Fully compliant with EU RoHS Directive (10 substances)
Specification
| specification |
| format |
dMC-50 |
dMC-35 |
dMC-24 |
| Output torque (N･m) |
50 |
35 |
twenty four |
| Main shaft diameter (mm) |
φ15 |
φ14 |
φ14 |
| Timing |
60/50s |
○ (8W motor used) |
○ (Using 4W motor) |
○ (Using 4W motor) |
| (90°stroke) |
| 50/60Hz |
30/25s |
– |
○ (8W motor used) |
○ (Using 4W motor) |
| Motor specifications |
Power supply voltage (V) |
8W: AC100 or 110 or 200 or 220 |
4W: AC24 or 100 or 110 or 200 or 220 |
| Power consumption (VA) |
8W: 40 |
4W: 24 |
| Heat resistance class |
E class |
| time rating |
50% (Reference short time rating: 30 minutes) |
| Wire port |
G1/2 1 or 2 locations Cable gland type (usable cable diameter φ6 to φ12) |
| Ambient temperature (℃) |
-20～+50 |
| protective structure |
Protection class against intrusion of solid objects and water: Equivalent to IP55 |
| Ignition degree, explosion class and equipment protection level of target gas or steam: IIBT4Gb |
| Painting |
Standard paint color: Munsell N5.0 System: Lacquer |
| Mass |
Approximately 6kg |
| option |
signal contact |
Maximum 2 pieces AC250V10A DC250V0.3A DC125V0.6A (resistive load) |
| potentiometer |
Wire-wound resistance type: 135Ω (standard), 200Ω, 500Ω, 1kΩ, 2kΩ |
| Conductive plastic type: 135Ω, 1kΩ, 2kΩ |
| others |
Lever, explosion-proof cable gland |
| Durability (according to internal regulations) |
50,000 round trips |
100,000 round trips |
| (timing 60s specification) |
(timing 30s specification) |
