,

Toho Seisakusho MPZ Series Control Motor With Manual Handle And Torque Limit Switch

Product Made in Japan
Manufacturer: Toho Seisakusho
Model: MPZ Series

MPZ-200 type control motor output torque 2000N・m
MPZ-400 type control motor output torque 4000N・m
MPZ-750 type control motor output torque 7500N・m

  • Equipped with a manual handle:
    Manual operation is possible without a clutch, and the special structure prevents the handle from rotating during electric operation, making it easy to handle.
  • Comes with a torque limit switch:
    Automatically stops the control motor during overtorque to protect equipment and equipment
     (C, CX, CE, E) as standard.
  • Two-position control or floating control (B) and proportional action (C,E) are now standard.

*All models use extreme pressure lubricating grease, so there is no need for regular lubrication.
* Explosion-proof type is also available.
*We can accommodate custom specifications other than those listed above, so please contact us.

Specification

Format MPZ-200 type control motor
MPZ-400 type control motor
MPZ-750 type control motor
Output torque
MPZ-200 2000 N・m
MPZ-400 4000 N・m
MPZ-750 7500 N・m
Torque limit switch setting value
MPZ-200 2000 N・m ±10%
MPZ-400 4000 N・m ±10%
MPZ-750 7500 N・m ±10%
Rated voltage
Motor 3φ, AC200/220V, AC400/440V±10% (50/60HZ)
Control circuit 1φ, AC100/110V, AC200/220V±10% (50/60HZ)
Output shaft rotation angle 90°
Operating time (90°) 30/25s or 60/50s (50/60Hz)
Control operation B: 2-position/3-position operation
C, E: Proportional operation
Power consumption
MPZ-200 0.2 kW
MPZ-400 0.4 kW
MPZ-750 0.75 kW
Motor type Three-phase induction motor with electromagnetic brake, 4 poles, class E insulation,
continuous rating
Auxiliary contact B: max. 6 pieces, C,E: max. 4 pieces, NC or NO
contact capacity AC250V 10A (non-inductive load)
Protective structure IP44
Material Case: cast iron
Permissible ambient temperature -5 ~ +40°C
Paint color Munsell N5
Mass/Drawing Please refer to the catalog PDF for details

 

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top