Japan, Tokyo Keiso
Tokyo Keiso P-100 Purgemeter
Made in Japan
Manufacturer: Tokyo Keiso
Model: P-100
P-100 is a standard type purge meter suitable for measuring both liquids and gases, covering a wide range from built-in use for equipment to purging industrial processes, and is widely used in various industries. PTFE packing is available.
Major Applications
Built-in use for general-purpose equipment (small flow rate)
Specifications
Measuring fluid | Gases Liquids |
Measuring range |
Air : Min. 0.5 to 5 mL/min (nor)
Max. 5 to 50 L/min (nor) Water : Min. 5 to 50 mL/min Max. 0.4 to 2 L/min ·When selecting a flow range, refer to “Index & Quick Reference for P Series Purge meters” (TG-S0001). ·When selecting a flow range, refer to the standard flow rate table. |
Range ability |
10:1(10:2 for some models)
|
Indication accuracy | ±5% F.S. |
Fluid pressure |
Max. 0.8 MPa
Up to 0.5MPa for models with a PTFE gasket |
Fluid temperature |
Max. 120°C (Depends on the gasket material)
|
Material |
Wetted part: SUS304, SUS316
Tapered tube: Heat-resistant glass Gasket : Nitrile rubber (NBR) (Max. 80°C) Chloroprene rubber (CR) (Max. 80°C) Fluro rubber (Max. 120°C) Ethylene-propylene rubber (EPDM) (Max. 80°C) PTFE (Max. 120°C) ·The maximum fluid temperature for each gasket material may vary depending on usage and ambient conditions.Mounting bracket : Aluminum Cover : Polycarbonate |
Process Connection |
Rc: 1/4″(Standard), 1/8″
NPT: 1/4″, 1/8″ |
Mounting |
Lock nut mount on the panel front (Standard)
Bezel mounting Panel embedded mounting With stand |
Mass | approx. 0.5kg |
Related Products
-
Kyowa BPR-A-50KPS BPR-A-S Small-sized Pore Pressure Transducer
-
TONE MB45 Offset Wrench, Long Type (45°)
-
Kitz UJ,UJM Stainless & High Alloy 10K Globe Valve
-
Obishi Keiki Seisakusho Inclination Measurement Level A100 Type
-
SAKUSAKU 2SSB-R10 Carbide Ball End Mill 2-Flute
-
Kondotec LKM Series Direct-motor Belt Drive Single Drum Standard Winches