Japan, Tokyo Ko-on Denpa
Tokyo Ko-on Denpa CP600 Series Variable Potentiometer
Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP600 Series
Features
Conductive plastic resistor element used (Low rotational noise). 16mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 6
Electrical Specifications (Initial Value)
Electrical specifications (initial value) | CP600 Series | ||
---|---|---|---|
Products | *CP601*-A* | *CP601*-B* | *CP601*-C* |
Circuit method | Potentiometer circuit | ||
Total resistance (1-C) | 5kohm, 10kohm, 50kohm, 100kohm | ||
Total resistance tolerance | ±20% | ||
Taper tolerance (150 degs) | 10 – 25% | 40 – 60% | 10 – 25% |
Residual resistance | Terminal 2 to C: 1% or 100ohm Terminal 1 to 2: 1% |
1 to 2: 1% or 100ohm Terminal 2 to C: 1% or 100ohm |
Terminal 1 to 2: 1% or 100ohm 2 to C: 1% |
Matching accuracy (150 degs) | 3dB Max. | ||
Voltage proof | 1 Min. at AC500V | ||
Insulation resistance | 50Mohm or more at DC500V | ||
Max rating | 0.1W (Taper-B), 0.05W (Other taper) | ||
Maximum input voltage | DC30V or less | ||
Sliding noise level | 47mV or less (by JIS C 6443) | ||
Sliding life | 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV) |
Mechanical Specifications
Mechanical specifications | CP600 Series |
---|---|
Operating angle | 300 degrees ±5 degrees |
Rotational torque | 0.1 to 1.2Ncm (Different by number of circuit) |
Strength Nut-Attached | 50Ncm |
Attached parts | Hexagonal nut (M8) |
Stopper strength | 50Ncm |
Push-pull strength | 50N |
General Specifications
General specifications | CP600 Series |
---|---|
Temperature range | -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage) |
Relative humidity | 90%RH (No condensation) |