Japan, Tokyo Sokushin
Tokyo Sokushi VSE-15A Servo Velocity-meter
Product: made in Japan
Manufacturer: Tokyo Sokushin
Model: VSE-15A
Useful for
Survey of an underground structure.
Earthquake monitoring
Aftershock
Micro-tremor
Any vibration Experiment
Feature
Sensibility is higher than the accelerometer
Dimension
SPETIFICATION
Model | VSE-15A (custom made order) |
Frequency range | 0.1~100Hz |
Mode of operation | Horizontal, Vertical |
Max. measuring range | ±1m/s (±100kine) |
Output | Velocity : 10cm/s/v、Acc:5mV/gal |
Output resistance | Less than 50 Ohm |
Max. Output voltage | ±10V |
Linearity | 0.03% of Full scale |
Resolution | 10-4 gal(Less 200μkine) |
Dynamic range | Approximately 140dB |
Damping ration | h = about 10000% |
Calibration coil | ・Sensitivity : 350μA m/s2 (3.5μA/gal)
・Coil resistance : 550Ω(±20%) |
Power requirements | ±15VDC |
Current consumption | Approximately 15mA |
Cross axis sensitivity | 0.03G/G |
Sensitivity of temperature coefficient | 0.01%/℃ |
Temperature coefficient of zero-shift | 0.05%/℃ |
Temperature range | -10℃~70℃ |
Waterproof | IP65 |
Connect cable | Shielded 4 pair twist cable |
Allowable shock | 30G (less than 0.1Sec) |
Dimension | 61×61×72(H) |
PRINCIPLE
The sensing mechanism is similar to force balanced servo accelerometers except the time differential part is adapted in feed back circuit.
The output [Eout] means very stable and high accuracy because unstable and nonlinear elements for sensing are not included in this expression. The M, r, G, C, R are all stable solid parts, this is important for guarantee the accuracy.