Tosoku DP Series Digital Code Switch

Product Made in Japan
Manufacturer: Tosoku
Model: DP Series

DP – the market leading digital code switch – series are designed for use in wide range of industrial instruments.

Features

● High reliability with double gold-plated sliding contacts.
● Eco-friendly:
1) Low cost and lesser parts by VA design
2) RoHS compliant
● Step angles: 13.85°, 15°, 20°, 27.69°, 30°
● Various types of codes: real binary, complementary binary, real gray, complementary gray
(either inhibit and/or parity circuit enclosed in all codes for safety). Special codes are also available.
● Duration of over 50000 switching cycles
● Waterproofed model available

Specifications

Items		Rated Value
Operating temperature		-20℃～ +70℃ (-4F ～ 158F)	Keep the body unfrozen
Storage temperature		-40℃～ +70℃ (-40F ～ 158F)	Keep the body unfrozen
Rotational torque		0.1N ～ 0.2N
Terminal strength		3N
Panel nut tightening torque		2N・m
Stopper strength		3N・m
Vibration Durability		Range 10 ～ 55 ～ 10Hz/min
Vibration Durability		No defect found after 2h of vibration stroke for 1.5mm to each XYZ direction
Contact resistance		≦ 100mΩ
Insulation resistance		DC250V/ After 1min	Terminal to terminal	500MΩ ≦
Insulation resistance		DC500V (1minLater)	Terminal to ground	5000MΩ ≦
Withstanding voltage		AC250/1min	Terminal to terminal
Withstanding voltage		AC1500V/1min	Terminal to ground
Load resistance	AC	5V 0.5A/ 48V 0.05A
Load resistance	DC	5V 0.25A/ 25V 0.05A
Durability	Rotational	Over 50000 times rotations
	Contact resistance	≦ 150mΩ
	Insulation resistance	DC250V/50mΩ ≦, (Over a min)

Warranty

● 1 year from the date of shipment

Part Number Designation

Dimensions (mm)

DP Accessory

Precautions

● How to connect panel
1. Peer double-sided tape off.
2. Stick double-sided tape to the panel (Pay attention to direction of adapter)
3. Use M9nut, toothed lock washer, and washer to tighten the panel and adapter.
4. M9 nut tightening torque shall be up to 2N.m.
5. Use double-sided tape under clean conditions.
PLEASE NOTE
1. Panel thickness shall be up to 2mm(to use adapter)
2. Panel thickness shall be up to 4mm(without adapter)
● Mounting hole dimensions
1. Make φ9.2 dimensions hole at the panel(to use adapter)
2. Check out left example to use without adapter

Japan, Tosoku