TOYO KEIKI GP and HP Series Power Factor Transducer

Product Made In Japan
Manufacturer: Toyo Keiki
Model: GP and HP Series

NHP-□1 : 1phase 2wire
NHP-□2 : 1phase 3wire
NHP-□3 : 3phase 3wire
Plug-in type makes upkeep and changes in configuration simple.
Improved reliability and greater compactness through the use of custom ICs.
JIS C 1111 AC/DC transducer 2.0 class.

Specification

INPUT
KINDMARKINPUTRATED VOLT.RATED CUR.FREQUENCYCONSUMPTION WATT
1φ2W
NHP-□1
1LEAD 0.5-1 – LAG 0.5100V5A50HzVoltage input:0.5VA at 1 element Current input:0.5VA at 1 element
2LEAD 0.5-1 – LAG 0.5100 V5A60Hz
3LEAD 0.5-1 – LAG 0.5200V5A50Hz
4LEAD 0.5-1 – LAG 0.5200V5A60Hz
9OTHER
1φ3W
NHP-□2
1LEAD 0.5-1 – LAG 0.52X100V5A50Hz
2LEAD 0.5-1 – LAG 0.52 X100V5A60Hz
3LEAD 0.5-1 – LAG 0.52 X200V5A50Hz
4LEAD 0.5-1 – LAG 0.52X200V5A60Hz
9OTHER
3φ3W
NHP-□3
1LEAD 0.5-1 – LAG 0.5110V5A50/60HZ
2LEAD 0.5-1 – LAG 0.5220V5A50/60HZ
9OTHER
Note : 1. 1 phase 2wire and 1 phase 3wire devices are set for a frequency of either 50Hz or 60Hz. 3phase line devices can operate at either 50Hz or 60Hz. 2. It is necessary to balance the voltage circuits of 3phase 3wire devices. However, the current will behave normally if the circuits are not balanced.
WORKING RANGE
Rated voltage range : 60V—240V Rated current range : 0.1 A—5A Rated frequency range : 45Hz—450Hz Input range for working range : LEAD 0.5—1—LAG 0.5 or LAG 0.5—1—LEAD 0.5
MARKOUTPUTLOAD RESISTANCEWORKING RANGE
1- 100 ~ 0 ~ + 100 mV600 Ω ~ ∞Max. voltage output: 10V, Loading current: below 10mA
Max. current output: 20mA, Loading voltage: below 11V
Relationship between input and output:
・Lead side input for minus output and Lag side input for positive output are standard.
・We can also make items that allow Lag side input for minus output and Lead side input for positive output.
・We can also produce items that at LEAD 0.5~1~LAG 0.5 have-50%~-/+100%~+50% characteristics.
2- 1 ~ 0 ~ + 1 V600 Ω ~ ∞
3- 5 ~ 0 ~ + 5 V2 kΩ ~ ∞
4- 10 ~ 0 ~ + 10 V5 kΩ ~ ∞
51 ~ 3 ~ 5 V2 kΩ ~ ∞
6- 1 ~ 0 ~ + 1 mA0 ~ 10 kΩ
7- 10 ~ 0 ~ + 10 mA0 ~ 1 kΩ
84 ~ 12 ~ 20 mA0 ~ 550 Ω
9OTHER OUTPUT
AUXILIARY POWER SUPPLY
MARKUSE RANGECONSUMPTION WATTREMARK
1DC 19—31Vapprox. 3 WPlease inquire about items not listed on the left.
4AC 80-264V (50/60Hz) DC 80-143Vapprox. 4 VA approx. 3 W
9OTHER

Specified Character

(1) Tolerance
±2% of output span. (Ambient temperature 23 ℃)
(2) Effect of temperature
Within ±0.5% of output span. (For 23 ℃±10℃ variations)
(3) Effect of auxiliary power supply
Within ±0.25% of output span. (For rated voltage ±10% variations)
(4) Effect of frequency
Within ±1.5% of output span. (For standard frequency ±5%
variations)
(5) Effect of input voltage
Within ±1.5% of output span. (For standard voltage ±10% variations)
(6) Effect of input current
Within±3% of output span. (For 20%-120% rated current variations)
(7) Effect of load resistance
Within ±0.05% of output span. (For load resistance range)
(8) Output ripple
Within 1%p-p of output span.
(9) Response time
Shorter than 1sec. (Time to 99% output)
(10) Dielectric strength
2000V AC,1min. (50/60Hz)
(Between input,output,auxiliary power and external case)
(11) Insulation resistance
Higher than 100MΩ at 500V megger.
(Between input,output,auxiliary power and external case)
(12) Weight

Power factor transducer may have the two types of characterristics shown below.
If no preference is specified characteristics will be as shown in 1.

Connection Diagram

DESIGNATION ITEM AT ORDER

1. TYPE AND AUXILIARY POWER SUPPLY2. INPUT3. OUTPUT
NHP—□□—□—□

① NHP-43-2-8
② NHP-43-9-8 INPUT : LEAD 0.5~1~LAG 0.5,115V,5A

※Power factor measurement in circuits that have tidal currents
The effectuve measurement range of NHP type power factor transducers is LEAD 0.5~1~LAG 0.5.
Does not operate normally during backward tidal current(the current supply and receeipt flow are reversed).
※When items from the NHP series are removed from their sockets,to prevent the input circuits from remaining open
a protector(diode unit ZHP-B)is fitted.
Inform us if this is not required.
※For special specification above contact a company representative.

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top