TOYO KEIKI JGP Series Temperature Transducer

Product Made In Japan
Manufacturer: Toyo Keiki
Model: JGP Series

JGP-□: As a temperature sensor the thermocouple is a temperature-DC conversion device.
Generous input specifications. ・Covers the seven types of sensor, ranging from 0~1700℃,regulated by JIS C 1602-1995(thermocouples).
Photo couple provides complete insulation between input and output-the influence of common mode noise is excluded and stable operation is ensured(AC 2000V,1 min.).
Linearizer is standard. ・Linearity below±0.3%.
Cold junction compensation(standard junction compensation) is standard ambient temperature range-10℃ to +55℃
Equipped with a burnout function circuit failure is immediately detected and output.
Plug-in type makes upkeep and configuration changes simple.

Specification

INPUT OUTPUT AUXILIARY POWER SUPPLY
Three types of B, R, S, K, E, J, T, N thermocouples conforming to JIS C 1602-1995. Six bands of measurement temperature range are standard. Cold junction compensation built-in. 8 standard type of output are available. Burnout: Upper AC 100/110V ±10% 50/60HZ approx. 3 VA
AC 200/220V ±10% 50/60Hz approx. 3 VA
DC 24V ±10% approx. 3 W
DC 100/110V ±10% approx. 3 W
DC 48V (38-62V) approx. 3 W
Types are immediately available. For types not listed above contact a company representative.
Available types of thermocouple Thermocouples based on JIS C 1602-1995 standards Corresponding to B, R, S, K(CA), E(CRC), J(IC), T(CC). For special temperature measurement ranges, please contact a company representative and explain your needs. Available with Max. voltage output 10V (600Ω~∞) Max. current output 20mA (0-550Ω) The burnout value may be lowered according to your needs.

Connection Diagram

JGP Series

Specified Character

(1) Available types of thermocouple
B, R, S, K(CA), E(CRC), J(IC), T(CC), N thermocouples conforming to on
JIS C 1602-1995(letters in brackets refer to former JIS designations).
(2) Tolerance
±0.5% of output span. (Ambient temperature 23℃)
(3) Effect of temperature
Within ±0.2% of output span. (For 23℃±10℃ variations)
(4) Effect of auxiliary power supply
Within ±0.1% of output span. (For rated voltage ±10% variations)
(5) Effect of load resistance
Within ±0.05% of output span. (For load resistance range)
(6) Output ripple
Within 0.5%p-p of output span.
(7) Response time
Shorter than 0.5sec. (Time to 99% output)
(8) Dielectric strength
2000V AC,1min. (50/60Hz)
(Between input,output,auxiliary power supply and external case)
(9) Insulation resistance
Higher than 100MΩ at 500V megger.
(Between input,output,auxiliary power supply and external case)
(10) Built-in Functions
Isolation(photo-couple method)-standard
Linearizer(linearity within±0.3%)-standard
Burnuot function – In the standard specification burnout is set for when the following upper limit
is exceeded:when the output value=max.output value+10~15% of the output span(e.g.,21.6~
22.4mA when the output is 4~20mA).
The burnout value may be lowered according to your needs.
(11) Attachment
Temperature detection device for Cold junction compensation
Type : ZGP-A1
(12) Weight
Approx.410g

AVAILABLE WORKING RANGE

SENSOR TYPE AVAILABLE WORKING RANGE MIN. TEMP. RANGE OF AVAILABLE TYPES
B 300℃ ~ 1820℃ 1000℃
R −50℃ ~ 1760℃ 1000℃
S −50℃ ~ 1760℃ 1000℃
K(CA) −270℃ ~ 1370℃ 100℃
E(CRC) −270℃ ~ 1000℃ 100℃
J(IC) −270℃ ~ 1200℃ 100℃
T(CC) −270℃ ~ 400℃ 100℃
N −270℃ ~ 1300℃ 200℃

DESIGNATION ITEM AT ORDER

1. TYPE AND AUXILIARY POWER SUPPLY 2. INPUT 3. OUTPUT
JGP-□ -□ □□ -□
AUXILIARY POWER SUPPLY
1 DC 24V
2 AC 100V/110V 50/60HZ
3 AC 200V/220V 50/60Hz
5 DC 100V/110V
6 DC 48V
9 OTHER
MARK TEP.SENSOR MARK INPUT
1 K(CA) 1 0 ~ 100°C
2 E(CRC) 2 0 ~ 200°C
3 J(IC) 3 0 ~ 300°C
4 T 4 0 ~ 400°C
5 R 5 0 ~ 500°C
6 B 6 0 ~ 800°C
7 S 7 0 ~ 1000°C
8 N 8 0 ~ 1200°C
9 OTHER 9 OTHER
OUTPUT LOAD RESIS.
DC 0 ~ 100mV 600Ω ~ ∞
DC 0 ~ 1 V 600Ω ~ ∞
DC 0 ~ 5 V 600Ω ~ ∞
DC 0 ~ 10 V 600Ω ~ ∞
DC 1 ~ 5 V 600Ω ~ ∞
DC 0 ~ 1mA 0 ~ 10kΩ
DC 0 ~ 10mA 0 ~ 1kΩ
DC 4 ~ 20mA 0 ~ 550Ω
OTHER OUTPUT

 

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top