TOYO KEIKI KGP Series Potentiometer Transducer

Product Made In Japan
Manufacturer: Toyo Keiki
Model: KGP Series

KGP-□: To fit all types of opening a rotating sensor is used.
A transducer that performs input as a potentiometer.
Plug-in type makes upkeep and configuration changes simple.
The potentiometer not selected resistance ranges from 100Ω to 10kΩ.
The rared output can be adjusted if it is 50% over the operating range.
Photo couple provides complete insulation between input and output.

Specification

INPUT OUTPUT AUXILIARY POWER SUPPLY
The Potentiometer standard is set when resistance values are between 100Ω to 10kΩ and when the entire operating range is 50% higher.

Potentiometers that work in ranges that are 33% higher than the entire operating range are also available.

8 standard type of output are available.

Available with
Max.voltage output 10V (600Ω~∞)
Max.current output 20mA (0~550Ω)

AC 100/110V ±10% 50/60Hz approx. 3 VA
AC 200/220V ±10% 50/60Hz approx. 3 VA
DC 24V ±10% approx. 3 W
DC 100/110V ±10% approx. 3 W
types are immediately available.
For types not listed above contact a company representative.

Connection Diagram

Specified Character

(1) Tolerance
±0.5% of output span. (Ambient temperature 23 ℃)
(2) Effect of temperature
Within ±0.5% of output span. (For 23 ℃±10℃ variations)
In case of input or output range
(3) Effect of auxiliary power supply
Within ±0.25% of output span. (For rated voltage ±10% variations)
(4) Effect of load resistance
Within ±0.05% of output span. (For load resistance range)
(5) Output ripple
Within 0.5%p-p of output span.
(6) Response time
Shorter than 1sec. (Time to 99% output)
(7) Dielectric strength
2000V AC,1min.(50/60Hz)
(Between input,output,auxiliary power supply and external case)
(8) Insulation resistance
Higher than 100MΩ at 500V megger.
(Between input,output,auxiliary power supply and external case)
(9) Weight
Approx.410g

DESIGNATION ITEM AT ORDER

ORDER EXAMPLE
① KGP-1-1-8
② KGP-2-9-9 INPUT : 1kΩ,0~80%, OUTPUT : DC 0~8V
※For special specifications please consult company representatives

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top