Toyo Keiki NGM Series Power Factor Transducer

Product Made In Japan
Manufacturer: Toyo Keiki
Model: NGM Series

NGM－□1A : 1phase 2wire
NGM－□2A : 1phase 3wire
NGM－□3A : 3phase 3wire
Lighter because plastic is used for casing.
Improved reliability and greater compactness through the use of custom ICs.
JIS C 1111 AC／DC transducer 3.0 class.

Specification

INPUT
KIND	MARK	INPUT	RATED VOLT.	RATED CUR.	FREQUENCY	CONSUMPTION WATT
1φ2W NGM－□1A	01	LEAD 0.5 ～ 1 ～ LAG 0.5	100V	5A	50Hz	Voltage input : 0.5VA at 1 element Current input : 0.5VA at 1 element Note : 1. 1 phase 2 wire and 1 phase 3 wire devices are set for a frequency of either 50Hz or 60Hz. 3 phase line devices can operate at either 50Hz or 60Hz. 2. It is necessary to balance the voltage circuits of 3 phase 3 wire devices. However, the current will behave normally if the circuits are not balanced
	02	LEAD 0.5 ～ 1 ～ LAG 0.5	100V	5A	60Hz
	11	LEAD 0.5 ～ 1 ～ LAG 0.5	200V	5A	50Hz
	12	LEAD 0.5 ～ 1 ～ LAG 0.5	200V	5A	60Hz
	99	OTHER
1φ3W NGM－□2A	01	LEAD 0.5 ～ 1 ～ LAG 0.5	2 x 100V	5A	50Hz
	02	LEAD 0.5 ～ 1 ～ LAG 0.5	2 x 100V	5A	60Hz
	11	LEAD 0.5 ～ 1 ～ LAG 0.5	2 x 200V	5A	50Hz
	12	LEAD 0.5 ~ 1 ~ LAG 0.5	2 x 200V	5A	60Hz
	99	OTHER
3φ3W NGM－□3A	21	LEAD 0.5 ～ 1 ～ LAG 0.5	110V	5A	50/60Hz
	31	LEAD 0.5 ～ 1 ～ LAG 0.5	220V	5A	50/60Hz

	99	OTHER
WORKING RANGE Rated voltage range : 60V—240V Current range : 0.1 A—5A Frequency range : 45Hz—450Hz Input range for working range : LEAD 0.5—1 —LAG 0.5 or LAG 0.5—1 —LEAD 0.5

OUTPUT
MARK	OUTPUT	LOAD RESISTANCE	WORKING RANGE
1	-100 – 0 – + 100 mV	600 Ω ~ ∞	Max. voltage output: 10V, Loading current: below 10mA Max. current output: 20mA, Loading voltage: below 11V Relationship between input and output: Lead side input for minus output and Lag side input for positive output are standard. We can also make items that allow Lag side input for minus output and Lead side input for positive output. We can also produce items that at LEAD 0.5—1—LAG 0.5 have —50%–Z+100%—F50% characteristics.
2	– 1 – 0 – + 1 V	600 Ω ~ ∞
3	– 5 – 0 – + 5 V	2k Ω ~ ∞
4	– 10 – 0 – + 10 V	5k Ω ~ ∞
5	1 – 3 – 5 V	2k Ω ~ ∞
6	1 – 0 – + 1 mA	0 ~ 10k Ω
7	– 10 – 0 – + 10 mA	0 ~ 1k Ω
8	4 – 12 – 20 mA	0 ~ 550 Ω
9	OTHER OUTPUT

AUXILIARY POWER SUPPLY
MARK	USE RANGE	CONSUMPTION WATT
1	DC 19V—31V	approx. 3 W
4	AC 80V-264V 50/60Hz DC 80V-143V	approx. 4 VA approx. 3 W
9	OTHER
0	NO ASSIST POWER SUPPLY (SELF POWER SUPPLY)

Power factor transducer may have the two types of characterristics shown below.
If no preference is specified characteristics will be as shown in 1.

NGM Series

SPECIFIC CHARACTER

(1) Tolerance
±3% of output span. (Ambient temperature 23 ℃)
(2) Effect of temperature
Within ±0.5% of output span. (For 23 ℃±10℃ variations)
(3) Effect of auxiliary power supply
Within ±0.25% of output span. (For rated voltage ±10% variations)
(4) Effect of frequency
Within ±1.5% of output span. (For standard frequency ±5%
variations)
(5) Effect of input voltage
Within ±1.5% of output span. (For standard vortage ±10%
variations)
(6) Effect of input current
Within ±3% of output span. (For 20%-120% rated current variations)
(7) Effect of load resistance
Within ±0.05% of output span. (For load resistance range)
(8) Output ripple
Within 1%p-p of output span.
(9) Response time
Shorter than 1sec. (Time to 99% output)
(10) Dielectric strength
2000V AC,1min.(50／60Hz)
(Between input, output, auxiliary power and external case)
(11) Insulation resistance
Higher than 100MΩ at 500V megger.
(Between input, output, auxiliary power and external case)

CONNECTION DIAGRAM

NGM Series

DESIGNATION ITEM AT ORDER

1. TYPE AND AUXILIARY POWER SUPPLY	2. INPUT	3. OUTPUT
NGM－□ □ A	－□	－□

ORDER EXAMPLE
① NGM－43A－21－8
② NGM－43A－99－8 INPUT : LEAD 0.5～1～LAG 0.5,115V,5A

※Power factor measurement in circuits that have tidal currents
The effectuve measurement range of NGM type power factor transducers is LEAD 0.5～1～LAG 0.5.
Does not operate normally during backward tidal current(the current supply and receeipt flow are reversed).
To provide power factor measurements in circuits with a tidal flow the NGM－□RA type is available.