TOYO KEIKI TGP Series rpm Transducer

Product Made In Japan
Manufacturer: Toyo Keiki
Model: TGP Series

TGP－□
TGP－□S: Slow pulse input type
TGP－□D: With power supply for sensor
A transducer that outputs a DC signal in proportion to AC signal and pulse sequence signal frequency.
A combination alternating current device generator and pulse encoder that supplies a direct current signal in proportion to the number of revolutions and the speed.

Plug-in type makes upkeep and configuration changes simple.
Improved reliability and greater compactness through the use of custom ICs.
The rared output can be adjusted if 50% over the operating range.
Photo couple provides complete insulation between input and output.

Specification

INPUT	OUTPUT	AUXILIARY POWER SUPPLY
3 standard type of sensor and 7 standard type of input are available	8 standard type of output are available	AC 100/110V ±10% 50/60Hz approx. 3.5 VA AC 200/220V ±10% 50/60Hz approx. 3.5 VA DC 24V ±10% approx. 3 W DC 100/110V ±10% approx. 3.5 W types are immediately available. For types not listed above contact a company representative.
Available with frequency input range: 9Hz～30kHz Available with sensor range AC voltage: below 200Vrms Voltage pulse: below 50V Contact signal: below 15V, 10mA	Available with Max. voltage output 10V (600Ω～∞) Max. current output 20mA (0～500Ω)

SPECIFICATION	ATTENTION
Input frequency is a slow pulse specification of below 25Hz. Either slow pulse specification electric pulse or contact signal can become the input.	When the input frequency is simultaneously converted output overshoot of about 5% may occur. When the input signal is AC there may be no response at voltages of less than 5%.

Specified Character

(1) Tolerance
±0.5% of output span. (Ambient temperature 23℃)
Not providing of below 5% at input range (TGP－□,TGP－□D)
Not providing of below 10% at input range (TGP－□S)
(2) Effect of temperature
Within ±0.5% of output span. (For 23℃±10℃ variations)
(3) Effect of auxiliary power supply
Within ±0.25% of output span. (For rated voltage ±10% variations)
(4) Effect of load resistance
Within ±0.05% of output span. (For load resistance range)
(5) Output ripple
Within 0.5%p-p of output span.
(6) Response time (Time to 99% output)
Input : abov 100Hz　Shorter than 1sec. 50Hz～100Hz Shorter than 2sec.
below 50Hz Shorter than 3sec.
(7) Dielectric strength
2000V AC,1min. (50／60Hz)
(Between input,output,auxiliary power supply and external case)
(8) Insulation resistance
Higher than 100MΩ at 500V megger.
(Between input,output,auxiliary power supply and external case)
(9) Power supply for sensor (TGP－□D only)
DC 12V ±1V,max.30mA
(10) Weight
Approx.410g

Connection Diagram

TGP Series

DESIGNATION ITEM AT ORDER

TGP Series

ORDER EXAMPLE
① TGP－1－12－8 SENSOR AC 30V
② CGP－2－29－9 INPUT : 0～150Hz,SENSOR DC 12V,OUTPUT : DC 0～7V
※For special specifications please consult company representatives.