Japan, Tsurumi Pump
TSURUMI LH SERIES Three Phase Submersible Pumps
Made in Japan
Manufacturer: TSURUMI PUMP
Model: LH SERIES
Feature:
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, our LH pumps provide you with increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
Specification:
- Discharge sizes from 4-12 inches and horsepower range from 20-250 hp
- Replaceable and adjustable high chrome wear rings provide increased wear resistance.
- Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.
- High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.
- Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.
- Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.
Related Products
-
Chiyoda Seiki TKR-2000P Series Large Flow/pilot Type Pressure Regulator (primary pressure: 20.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 900 m3/h・Air)
-
Nihon Flux P-001 Reciprocating Pump for Pail Cans
-
KONAN YS271 Zero-differential Pressure Pilot-acting 2-port Solenoid Valves Normally Closed Type
-
TOYO KENSETSU KOHKI TFC-LLA AUTO REBAR CUTTING
-
Japan Life JL Tanbudar
-
Ross Asia LF Series In-line manifold Dale series (base mounted valve)