- Home
- Products
- UHT CORPORATION RFP-3P20 series Roll Type Film Material Punching Machine:3-axis Unit Type
Japan, UHT CORPORATION
UHT CORPORATION RFP-3P20 series Roll Type Film Material Punching Machine:3-axis Unit Type
Made in Japan
Manufacturer: UHT CORPORATION
Model: RFP-3P20
Features
- Applicable to several materials. Fits for 500 mm roll width of metal foil, resin film and paper, etc.
- Various processing is realized. System to exchange loading units realizes circle punch, pattern and outside blanking, etc.
- For quality control. Installing of the testing system.
Characteristics
- System to exchange loading units
- Installing by choosing from punching die units: PU-25 PU-50 PU-25 (OP.)
- Installing of the testing system can control quality.
- Testing punched holes and measuring accuracy punching the center of target marks.
- Can create punch data by teaching method.
- Can input numerical value into PC, and can easily create data by monitoring and teaching patterns with camera.
- Work tension mechanism and roll edge control enable high accuracy processing.
- Photos: 4-position clamper and built-in cleaning roller (OP.)
- High rigidity punching frame enables high accuracy processing.
- Light weight and high rigidity frame with ductile iron casting box type frame enables high accuracy processing.
- Space saving compact design
Standard Specifications
Model name | RFP-3P20 | |
---|---|---|
Work | Material | Metal foil, Resin film, Paper, etc. |
Size | Max.500mm(Roll width) Max.φ400mm Thickness:10~200μm(Estimate・ depending on a material & a hole diameter) |
|
Max working area | Max. X500× Y:500mm | |
Productivity | Punched hole diameter | φ0.1~6.0mm |
Punching Accuracy | ±20μ(with image processing mode) | |
Punching Speed | Max. 500punches/min (NC punch with 1mm pitch) Max.60punches/min (Image processing with 20mm pitch in Y direction) |
|
Punching power | 300N(PU-25) 1000N(PU-50) With 0.6MPa | |
Machinery | Punching unit | Offset system into CCD camera unit |
PU-25:Three axes PU-50 PU-75(OP.) | ||
Work clamping unit | Back tension held by nip roll and 4-position clamper | |
R/R unit | Tension control driven by torque motor | |
Control Function | Control unit | UHT make controller exclusively for mechanism control (MJUC) |
Operation | Operated by 6.5 inch touch panel | |
Image processing method | Target Mark Size | φ0.6~3.0mm |
Searching Mechanism | Gray scale or detecting and correcting binary center of gravity | |
Range of View | Standard View 5×4mm With image processing4.5×3.5mm | |
Illumination | Permeation・ Reflection | |
Data | Programming method | ・Teaching play back method ・Data conversion software from CAD data direct to punching data. |
Programming capacity | Max. 30000 Position | |
Testing system | Testing punched holes ・Accuracy measurement ・Judgement ・PC control | |
Power Source | 3φ AC200V±10% 1.5kVA | |
Air Pressure Source | 0.4~0.7MPa | |
Machine Size | W1300×D1510×H1550mm(Body) | |
Machine Weight | Approx.1300kg | |
Working condition | Temperature | 10~35℃(22±2℃ recommended) |
Humidity | 40~60%(Non-crystal) | |
Regular accessories | Punch/die/stripper 1 set Freezing air drier (Outer installation) |
Options
- Punching units : PU-50,PU-75
- Power box
- Air intensifier
- Lift car (Roll removing)
- NG marking unit during inspection
- Punch/die/stripper
- Cleaning roller
- CAD converting software