Japan, UHT CORPORATION
UHT Corporation Spindle No.4 For Cylinder Polishing

Made in Japan
Manufacturer: UHT CORPORATION
Model: Spindle No. 4
The GU-1 spindle accepts the largest diameter cup wheels.
Ideal for external grinding rather than for internal grinding.
The wheel diameter is larger than the spindle diameter, and the external grinding of long distances is available depending on the installation on the lathe.
Also accepts cutting wheels.
Main Specifications
product name | Spindle No. 4 |
---|---|
Part number | 314 |
Abrasives available | Dedicated 48-mm dia. cup wheels Dedicated 48-mm dia. diamond/CBN wheels 75-mm cutting wheels |
Max. number of revolutions | 13,000rpm |
Gross weight | 1,250(g) |
Package dimensions | 230×87×80 (mm) |
Related Products
-
Eagle Jack (Konno Corporation) NZ-VC Residual Pressure Release Tool
-
KONAN YS272 Zero-differential Pressure Pilot-acting 2-port Solenoid Valves Normally Open Type
-
KONAN RV6-G 0 to 0.04MPa Regulators
-
Japan Clamp DHK-DS Vertical Clamp For Reinforcing Bar / Round Bar
-
UHT Corporation New soft lap φ30 #120
-
Kamoi Kakoshi No.110 Masking Tape for Vehicles / General Paints