Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ 5.0
Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ5.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
product name | The collets and collet nut for the Spindle No. 5 φ3.175 |
---|---|
Part number | 5009049 |
Related Products
-
Eisen IH Series Electroplated Tool Oil Hole Type (straight blade shape) Glass Drill
-
Watanabe WTM-DMD6C Web-enabled demand controller
-
Kitz 150UOA,150UOAM Stainless & High Alloy Class 150 Swing Check Valve
-
Watanabe A6 Series Digital Panel Meter For DC Voltage
-
NPK Stone Scraper
-
Watanabe WSP-THS Thermocouple temperature transducer – Signal Converter