Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ 6.0

Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ6.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
Product name | The collets and collet nut for the Spindle No. 5 φ6.0 |
---|---|
Part number | 5009017 |
Related Products
-
UHT Corporation DF5-06 #600 Diamond Stones
-
NAGANO KEIKI PC20 Programmable Pressure Controller
-
Fuso Seiki Receptacles And Pressure Tanks
-
Ross Asia SV27 series Pilot operated check valve for external monitoring Safety cat. 2PLc
-
Maxpull Mini Reciprocating Endless Winch EMX Series
-
WINOA IKK Brown Fused Alumina