Drilling And Cutting, Japan, Unika
UNIKA B/BS Rooty Set Anchor
Manufacturer: UNIKA
Model: B type/M (Chromate Plating)/ B type/W (Chromate Treatment)/ BS type/M (Stainless)/ Hammering tool
- ■Highly reliable threaded type anchor that extends in response to load.
- ■Offers stable strength, since nut is tightened after fastening with striking rod.
| Thread dia | Tightening Torque |
|---|---|
| M6, W1/4 | 5 N・m |
| M8, W5/16 | 12 N・m |
| M10, W3/8 | 24 N・m |
| M12, W1/2 | 42 N・m |
| M16, W5/8 | 100 N・m |
| M20, W3/4 | 200 N・m |
| M22, W7/8 | 280 N・m |
| M24, W1 | 360 N・m |
USES
Concrete
- Drill preparation hole.
- Position anchor.
- Hammer in with striking rod.
- Complete attachment by tightening nut.
■Uses
Machine installation, soundproof walls/air-conditioning equipment/signboard attachment, and elevator construction work, etc.
- Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
- Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
- Drill the preparation hole vertically against the drilled material surface.
- Blow the hole thoroughly to remove shavings inside.
- JCAA Product Certification Mark
- Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA).
SPECIFICATION
B type/M (Chromate Plating)
| Size | Thread size | Size | Thread size |
| B-650 | M6 | B-16100 | M16 |
| B-865 | M8 | B-16120 | |
| B-1070* | M10 | B-16125* | |
| B-1080* | B-16160* | ||
| B-10100 | B-20170 | M20 | |
| B-10120 | B-20200 | ||
| B-10150 | B-22200 | M22 | |
| B-12100* | M12 | B-24200 | M24 |
| B-12120* | |||
| B-12125* | |||
| B-12160* | |||
| B-12200 | |||
B type/W (Chromate Treatment)
| Size | Thread size |
| B-3070* | W3/8 |
| B-3080* | |
| B-40100 | W1/2 |
BS type/M (Stainless)
| Size | Thread size | Size | Thread size |
| BS-650 | M6 | BS-16100 | M16 |
| BS-865* | M8 | BS-16120 | |
| BS-1070* | M10 | BS-16125 | |
| BS-1080* | BS-16160 | ||
| BS-10100 | BS-20170 | M20 | |
| BS-10120 | BS-20200 | ||
| BS-10150 | BS-22200 | M22 | |
| BS-12100* | M12 | BS-24200 | M24 |
| BS-12120 | |||
| BS-12125 | |||
| BS-12160 | |||
| BS-12200 | |||
Hammering tool
| Part No. | Anchor size |
| 28B | M6, W1/4 |
| 258B | M8, W5/16 |
| 38B | M10, W3/8 |
| 48B | M12, W1/2 |
| 58B | M16, W5/8 |
| 68B | M20, W3/4 |
| 78B | M22, W7/8 |
