Drilling and Cutting, Japan, Unika
UNIKA UC/UCS/UC-D Unicon Anchor
Manufacturer: UNIKA
Model: UC type (Unichromate Treatment)/ UC type/M (Chromate Treatment)/ UCS type (Stainless)/ UC-D type (Hot-dip galvanization)/ Hammering tool (Hand)/ Hammering tool (Machine)/ Unicon anchor bucket set
■The leading tapping anchor boasting a large contact area and excellent tensile strength.
■Operating performance is improved by the small preparation hole bore due to the collar outer diameter being narrower than the tap diameter. Overhead installation is also easier.
■Features inner cone. Eliminates loss of cone during installation or “drop-out” after installation.
| Thread dia | Tightening Torque |
|---|---|
| W1/4 | 4 N•m |
| M8, W5/16 | 10 N•m |
| W3/8 (1030/3030B) | 20 N•m (10 N•m) |
| W1/2 | 35 N•m |
USES
Concrete
- Drill preparation hole.
- Position anchor.
- Strike cone with striking rod to set anchor.
- Secure fixture with bolt.
■Installation explanatory video
■Uses
Electrical, plumbing, air-conditioning/heating works.
- JCAA Product Certification Mark
- Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA).
SPECIFICATION
UC type (Unichromate Treatment) UC type/M (Chromate Treatment) UCS type (Stainless)
| Size | Thread dia | Size | Thread dia | Size | Thread dia | ||
| UC-2025 | W1/4 | UC-830* | M8 | UCS-3030B | W3/8 | ||
| UC-2530* | W5/16 | UC-1030 | M10 | UCS-3040* | |||
| UC-3030B | W3/8 | UCS-4050* | W1/2 | ||||
| UC-3040* | |||||||
| UC-4050* | W1/2 | ||||||
UC-D type (Hot-dip galvanization) Hammering tool (Hand) Hammering tool (Machine)
| Size | Thread dia | Size | Anchor size Part No. | Size | Anchor size Part No. | ||
| UC-3030D | W3/8 | PT-20 | UC-2025 | SD-30 | UC-3040 | ||
| PT-25 | UC-2530/830 | SD-30X500 | |||||
| PT-30 | UC-3040 | SD-30X1000 | |||||
| PT-30X1000 | SD-30S | UC-3030B/1030 | |||||
| PT-30S | UC-3030B/1030 | SD-30SX500 | |||||
| PT-30SX1000 | SD-30SX1000 | ||||||
| PT-40 | UC-4050 | SD-40 | UC-4050 | ||||
Unicon anchor bucket set
| Part No. | Anchor Part No. |
| UB-01 | UC-3030B(500 pcs.) |
| UB-02 | UC-3040(500 pcs.) |
| UB-03 | UCS-3030B(200 pcs.) |
| UB-05 | UC-3030B(500 pcs.) |
| Part No. | Anchor Part No. |
| UB-21 | UC-3030B(500 pcs.) |
Related Products
-
LOBTEX UM Hybrid Adjustable Angle Wrench
-
TONE BL-S Short Neck Long Ball Point Hex Key Wrench L-Type
-
Vessel No.270BW Cushion Stubby (Bit-replaceable grip)(interchangeable)
-
Hasegawa Electric HRD-27 Residual Electric Charge Discharging Stick
-
Watanabe WGP-AZ AC converter – Signal Converter
-
OSC53CU105 Shockwave Units
