W2-I061 E Snap Ring (Ring Pack/JIS)
Model: W2-I061
Iron (or standard), Stainless steel (303, 304,…).
Plain.
Unit: mm
| Ring No. | Shaft Dia (S) | JIS RING DIMENSIONS | GROOVE DIMENSIONS | Allowable Thrust Load (Ring) – Safety Factor = 3 SK85M [N] | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inside Diameter | Outside Diameter | Thickness | Groove Diameter | Groove Width | ||||||||
| Min | Max | D1 | Tolerance | D2 | t | Tolerance | G | Tolerance | W | Tolerance | ||
| JE-0.8※ | 1.0 | 1.4 | 0.80 | +0 -0.08 | 2.0 | 0.2 | ±0.02 | 0.80 | +0.05 -0 | 0.30 | +0.05 -0 | 49 |
| JE-1.2※ | 1.4 | 2.0 | 1.20 | +0 -0.09 | 3.0 | 0.3 | ±0.025 | 1.20 | +0.06 -0 | 0.40 | 118 | |
| JE-1.5※ | 2.0 | 2.5 | 1.50 | 4.0 | 0.4 | ±0.03 | 1.5 | 0.50 | 226 | |||
| JE-2※ | 2.5 | 3.2 | 2.00 | 5.0 | 0.4 | 2.0 | 0.50 | 284 | ||||
| JE-2.5※ | 3.2 | 4.0 | 2.50 | 6.0 | 0.4 | 2.5 | 0.50 | 363 | ||||
| JE-3※ | 4.0 | 5.0 | 3.00 | 7.0 | 0.6 | ±0.04 | 3.0 | 0.70 | +0.1 -0 | 677 | ||
| JE-4※ | 5.0 | 7.0 | 4.00 | +0 -0.12 | 9.0 | 0.6 | 4.0 | +0.075 | 0.70 | 853 | ||
| JE-5※ | 6.0 | 8.0 | 5.00 | 11.0 | 0.6 | 5.0 | 0.70 | 981 | ||||
| JE-6※ | 7.0 | 9.0 | 6.00 | 12.0 | 0.8 | 6.0 | 0.90 | 1.570 | ||||
| JE-7※ | 8.0 | 11.0 | 7.00 | +0 -0.15 | 14.0 | 0.8 | 7.0 | +0.09 -0 | 0.90 | 1.766 | ||
| JE-8※ | 9.0 | 12.0 | 8.00 | 16.0 | 0.8 | 8.0 | 0.90 | 1.962 | ||||
| JE-9 | 10.0 | 14.0 | 9.00 | 18.0 | 0.8 | 9.0 | 0.90 | 2.256 | ||||
| JE-10 | 11.0 | 15.0 | 10.00 | 20.0 | 1.0 | 10.0 | 1.15 | +0.14 -0 | 3.826 | |||
| JE-12 | 13.0 | 18.0 | 12.00 | +0 -0.18 | 23.0 | 1.0 | 12.0 | +0.11 -0 | 1.15 | 4.415 | ||
| JE-15 | 16.0 | 24.0 | 15.00 | 29.0 | 1.5 | ±0.05 | 15.0 | 1.65 | 8.339 | |||
| JE-19 | 20.0 | 31.0 | 19.00 | +0 -0.21 | 37.0 | 1.5 | 19.0 | +0.13 -0 | 1.65 | 9.810 | ||
| JE-24 | 25.0 | 38.0 | 24.00 | 44.0 | 2.0 | ±0.08 | 24.0 | 2.20 | 17.658 | |||
Note: Rings marked with ※ are standard products that have been “Ring Pack®”-processed for use with Iwata “Dispensers”.
