Manufacturer: Wadeco Corporation
Model: TC-6B

Features

• When two points of empty tension and groove tension are set, the voltage is output proportional to the measured value of the counter between the two points, making tension setting easy and tension control continuous.
• With output contacts that output at the full roll value or “0” of the winding thickness.
• It is equipped with both power and voltage outputs. The power output can directly control the powder clutch and the like, and the voltage output can control the power regulator and so on.
• You can switch to an external tension setter or connect an external calculator to compensate for inertia when starting or stopping.
• It is equipped with an auxiliary input terminal that inputs the displacement of the dansa roller or other voltage plasma or minus and increases or decreases the output of the wind thickness value.
• The output meter is a digital display and can be switched between a voltmeter and an ammeter.
• After the ban is lifted, it is equipped with a prohibited input terminal that starts calculating the wind thickness after receiving the first gate input, so the display of the wind thickness will not be disturbed when starting or stopping.
• It has an indicator light that allows you to check the presence or absence of counting and gate input pulses at a glance.
• The tension setter is a multi-dial with lock. The setpoint can be locked and the tension can be fine-tuned.
• It has a built-in 15 V, 50 mA DC sensor power supply and ±a 15 V, 10 mA DC auxiliary power supply.
• With memory by built-in battery.
• The display of unnecessary upper digits is eliminated, and the numerical values can be read directly using the zero-suppress method.