YK DMV-800 8-screen Splitter Multi-viewer

Manufacturer: YK Wireless Co., Ltd.
Model: DMV-800

Features

Screen splitter made by Artics, a Japanese manufacturer specializing in image processing equipment
Professional 8-split display capable of single screen/4/6/9-split display
Japanese menu display
Supports CVBS input

Specifications

Video Format	NTSC compliant
Camera video input	8 inputs (with loop-through) BNC terminal VBS 1.0Vp-p 75Ω termination Unbalanced (75Ω termination OFF when loop-through is used)
Monitor video output (main)	1 system BNC terminal VBS 1.0Vp-p 75Ω termination unbalanced
4-split screen dedicated output	2 BNC terminals VBS 1.0Vp-p 75Ω termination Unbalanced QA: 1-4 channels 4-split dedicated QB: 5-8 channels 4-split dedicated
Video output display (main)	Single screen 1-8 channels 4-split A (1-4 channels) 4-split B (5-8 channels) 6-split A (1-6 channels) 6-split B (1-4, 7, 8 channels) 9-split (1-8 channels, black display at bottom right) Automatic switching All refreshed at 1/60 (sec) Noiseless
Automatic switching (auto sequence)	Automatic switching of single screen channels 1 to 8 only Automatic switching of split screens (4A, 4B, 6A, 6B, 9) only Mix of single screen and split screen Display time of 0 to 99 seconds can be set for each screen

Display pixels	screen	Image size	Aspect Ratio	Number of pixels
	Single screen	normal	4:3 16:9	672×456 504×456
	Single screen	Large	4:3 16:9	712×480 528×480
	4-split screen	normal	4:3 16:9	672×456 504×456
	4-split screen	Large	4:3 16:9	708×480 528×480
	6 split screen	normal	4:3 16:9 FULL	672×(152×2) 672×(204×2) 672×456
	6 split screen	Large	4:3 16:9 FULL	708×(160×2) 708×(212×2) 708×480
	9-split screen	normal	4:3 16:9	672×456 504×456
	9-split screen	Large	4:3 16:9	708×480 528×480

Control signal input/output terminal	Terminal block Alarm/remote selectable from menu Alarm input 8 channels (1 to 8ch) No-voltage make/break contact Remote input 14 channels (automatic switching, each single screen, each split screen)　 No-voltage make contact No-voltage make contact Alarm output 1 channel Open collector DC12V 100mA or less
Alarm function	Single screen display of alarm input channel Alarm hold mode: INT./EXT. Detection contact: Make/Break INT. hold time: Variable from approx. 003 to 999 seconds Operation after alarm release: Return/As is Alarm display: ON/OFF
RS-232C	RXD, TXD, GND RS-232C signal standard compliant　 D-Sub 9-pin male (inch screw #4-40UNC)
RS-485	RJ-11 x 2 (loop-through)　 RS-485 signal standard compliant (Half Duplex) Modular jack
Video Loss Detection	Detects no input from camera video inputs 1 to 8 Detection: ON/OFF Video loss display: ON/OFF Signal output: ON/OFF No input screen background color: Black/Blue
Title Display	Up to 10 characters per channel. Alphabet, numbers, symbols, katakana.　 Display position can be changed for single screen only. Split screen display position is bottom center.
Split Screen Borderline	OFF/WHITE/GRAY/BLACK
Mirror Image	Left/right (horizontal) mirror image can be set for each channel
Channel Layout	Split screen channels can be arranged arbitrarily. The same channel cannot be displayed on the same screen. 4-split dedicated output is fixed.
Video Level	Brightness, contrast, chroma hue, and color tone can be adjusted in 256 steps for each channel.
Insertion character position	Fine-tuning the display position of titles, menus, messages, etc. Horizontal: 16 levels Vertical: 16 levels
Button lock function	Locks the single screen 1 to 8/split screen/automatic switching display and prohibits button operations
Operating temperature and humidity	0 to 40°C RH20 to 90% (no condensation)
Power supply voltage/power consumption	AC100V 50/60Hz approx. 9W
AC Input Cable Length	Approximately 1.7m
External dimensions	420(W) x 251(D) x 44(H) [mm] (excluding rubber feet and protrusions)
Case color	Ivory
mass	Approx. 2.9 kg
accessories	operating instructions
Sold separately	Dedicated remote controller RMC-800 19-inch rack mount bracket (JIS/EIA)

Accessories

Below is a list of the main accessory categories that are compatible with this product. If you need any accessories, please purchase them separately.

Compatible accessories	explanation
cable	This product does not come with a wiring cable. If you need a wiring cable, please purchase it separately.
connector	If a conversion connector is required for connection, please purchase it separately.
RMC-800	8-channel remote controller
DTC-P09S	D-sub connector/terminal block converter