YK Wireless Co.Ltd
YK SMT-100 Outdoor Installation Compatible All Weather Sound Collection Microphone
Manufacturer: YK Wireless Co., Ltd.
Model: SMT-100
Feature
Switchable between balanced and unbalanced output. Balanced output allows for long distance wiring of approximately 100m
(a balancing transformer unit [TU-600] may be required on the input side).
All-weather type that can be used outdoors (equivalent to IPX5)
Two independent outputs allow connection to two devices
Terminal type for convenient wiring
Specifications
| Product name | Sound collection microphone |
| Part number | SMT-100 |
| Power supply voltage | DC8 to 30V (with polarity) |
| Current consumption | 15mA or less |
| Output Conditions | Maximum wiring length (balanced: 100 m, unbalanced: 20 m) Load impedance: 600 Ω Balanced: twisted shielded wire Unbalanced: shielded wire, twisted shielded wire *Depending on the installation environment, the maximum wiring length may not be met due to noise interference. |
| output | 2 outputs (switchable between ① and ② independently) ① Microphone setting: -60dBV ±10dB (variable with volume) ② Line setting: -30dBV ±10dB (variable with volume) |
| Ambient temperature | -10℃～+50℃ |
| Installation location | Indoor/outdoor (equivalent to IPX5) * Cover cannot be installed facing upwards horizontally outdoors |
| Wiring Connection | Terminal type (M3 self-up terminal) |
| Suitable cable diameter | Φ4.5～7.8mm |
| mass | Approx. 130g |
| exterior | Body: Resin (white) Cover: Resin (white) |
| What’s in the box | SMT-100 Body Tapping Screw (with rubber washer): φ3×16 2 pieces Cap (including inner cap): 1 set Double-sided adhesive tape: 1 piece Instruction manual |
Note
- In order to improve quality, product specifications may change without notice.
Accessories
Below is a list of the main accessory categories that are compatible with this product. If you need any accessories, please purchase them separately.
| Compatible accessories | explanation |
|---|---|
| cable | This product does not come with a wiring cable. If you need a wiring cable, please purchase it separately. If you have any questions about the cable, please feel free to contact us. |
| DC12V-1A adapter | This product does not come with a power supply. If you need constant power, please purchase a DC12V-1A switching AC adapter separately. |
| connector | If a conversion connector is required for connection, please purchase it separately. |
| TU-600 | When wiring over 20m, please use it in combination with the separate balancing transformer unit [TU-600]. When combined, long distance wiring up to 100m is possible. |
In addition to the accessories listed above, we also carry a variety of other peripherals and accessories. Please also take a look at the [Peripherals and Accessories] category.
