Yokota YLT-L Series Air Shut Off Wrench

Product Made In Japan
Manufacturer: Yokota Industrial Co., Ltd.
Model: YLT-L Series

Shut-off impulse wrench

It detects the pressure rise in the liner (hydraulic section) during tightening, and when the tightening torque reaches the set level, the built-in shutoff valve activates and automatically stops the tool, allowing for easy, high-precision tightening.

Improved durability

・By installing a check valve mechanism (PAT), the load on the seal material is reduced, and durability is improved by preventing oil leakage.
・By adopting a double-end retention mechanism (PAT) in the liner (hydraulic section), heat generation is reduced by approximately 15% compared to our previous model. The oil’s dynamic viscosity is stable, and durability is improved.

Improved fastening accuracy

-By adopting a new reset mechanism (PAT), the sensor pressure is smoothly and reliably returned to its original state, allowing for stable tightening every time without being affected by the residual pressure from the previous time.

Specially designed for each supply air pressure, it ensures reliable shutoff and provides high-precision tightening.

Improved working environment

· Noise and vibration are significantly reduced by adopting a double-end retention mechanism (PAT) in the liner (hydraulic section).

Lightweight

– Approximately 14% lighter than our previous model.

  • Supply air pressure: 0.4MPa to 0.5MPa

Specification

Model Capable screw diameter Tightening torque (N・m)
(Reference value at 0.4~0.5MPa)
Overall length (mm) Weight (kg) Bit size (mm)/square drive (mm)
YLT60AL M6 5.0 to 11.5 164 0.95 6.35
YLT60BL M6 5.0 to 11.5 164 0.95 6.35
YLT70AL M6 to M8 11.0 to 25.0 177 1.01 6.35
YLT70BL M6 to M8 11.0 to 25.0 177 1.01 6.35
YLT60L M6 6.0 to 13.5 164 0.95 9.5
YLT70L M6 to M8 13.0 to 28.0 177 1.01 9.5
YLT80L M8 to M10 25.0 to 48.0 187 1.12 9.5
YLT110L M10 to M12 45.0 to 75.0 194 1.51 12.7
YLT120L M12 60.0 to 100 201 1.79 12.7
YLT140L M14 80.0 to 125 214 2.08 12.7
YLT150L M14 to M16 110~170 237 2.96 19.0

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top