Yokota YS-e600A Battery System Wrench

Product Made In Japan
Manufacturer: Yokota Industrial Co., Ltd.
Model: YS-e600A

Features

    • Small and lightweight thanks to strain gauge and DC detection method
    • High tightening accuracy and automatic stop function

Torque sensor: Our unique direct spindle detection method constantly monitors torque. The tool automatically stops at the set torque. Ultra-miniature angle sensor (PAT): Equipped with an ultra-miniature rotary encoder, it detects the rotation angle and direction in 1-degree increments.

    • Direct drive provides low vibration, low noise, and low reaction force
    • A newly developed outer rotor motor was adopted. Controller and driver functions are built into the tool.
  • A newly developed torquey, high-speed motor. In conventional power tools, motor output is amplified by planetary gears, but we have achieved a gearless system by developing a dedicated motor specialized for tightening. Tightening can be done more smoothly with less vibration, less gear noise, a more compact size and lighter weight.
  • Non-contact trigger, reverse lever
  • Built-in buzzer/LED notifies fastening results and abnormalities
  • Heat generation countermeasures. Equipped with a motor fan
  • Uses a battery with a remaining charge indicator
  • Impulse (oil pulse) mechanism

Specification

Capable screw diameter M6
Torque range (N・m)
(Upper limit when tightening with HardJoint)*
5–18
Weight (kg) (excluding battery) 1.75(1.34)
Fastenings per minute (pieces) * 10
Number of fastenings/Charging (units) * 1300
Overall length (mm) 214
Overall height (mm) 244
Outer side from spindle center (mm) 32.5
Square drive (mm) 9.5
Rated speed (rpm) High 1500~4800, Middle 1500~3000, Low 1200~1500
Vibration (m/ s2 ) <2.5
Noise (dB) 72
Compatible Battery BPL-1820 (18V-2A, 0.41Kg)
Standard accessories 1 protector (for tools), 1 TF pin (2 x 90)
option BPL-1820 (battery), BC0075G (charger), battery protector

*1: The torque range is a guideline calculated in a bolt test. Select a tool that matches the work conditions.

*2: Calculated based on our test conditions (fastening time 0.5 seconds, ambient temperature 30°C). Varies depending on work conditions.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top