Yokota Industrial Co., Ltd.
Yokota YTC Series Pokayoke Controller
Product Made In Japan
Manufacturer: Yokota Industrial Co., Ltd.
Model: YTC Series
Features
Controller for managing the number of fastenings (quantity management)
“Management of number of fastenings” using air pressure sensor, “Automatic stop of wrench”, and “Display and alarm output” in case of abnormal fastening
The sensor detects the fluctuation of intake air pressure when the tool is in use, and judges the tightening based on the tightening time and number of strikes. It judges the tightening condition as OK/NG and counts the number of tightenings.
Connectable tools:
・Special wrench with pressure detection tube
・General-purpose impulse wrench *1
・General-purpose impact wrench *1
・Shut-off wrench *1
・QL wrench
*1 Use the joint included with YTC-3
Specification
Input Power | AC100V~240V±10% 50/60Hz |
---|---|
Power consumption (W) | Less than 10W |
Mass (kg) | 1.8 (excluding power cable) |
Outer diameter (mm) | 70(W)×150(H)×175(D) (excluding protrusions) |
Operating temperature (℃) | 5–40 |
Operating humidity (%RH) | 35 to 80 (no condensation) |
Interface | I/O (8 inputs, 4 outputs) |
Number of tools that can be connected | 1 |
Air Pressure Sensor | 0 to 0.99 MPa |
Controller/Tool usable distance | 5m (tube length) |
Standard accessories | 1 power cord, 1/4 joint, φ4 tube x 5m |
option | Joint 1/4 (for large size), joint 3/8, 3/8 solenoid valve, 1/2 solenoid valve, silencer for solenoid valve, 3/8 pressure reducing valve, 1/2 pressure reducing valve |