,

YOSHITAKE DP-200 Solenoid Valve

Made in Japan
Manufacturer: Yoshitake
Model: DP-200

  • The shock of water hammer is reduced, and the closing time of valve is shortened
  • No leakage at valve seat because synthetic rubber is used for valve part
  • Usable for wide pressure range of 0 – 1.0 MPa (0.1 – 1.0 MPa if the coil set sideways)

Specifications

FeaturesAC, diaphragm, normally closed
TypeDiaphragm type solenoid valve
SpecificationsProduct typeSolenoid Valve_Diaphragm
Nominal size10A (3/8″) – 50A (2″)
ApplicationWater, air, N2 gas, CO2 gas (dry), Ar gas
End connectionJIS Rc screwed
Max. pressure1 MPa
Working pressure0 – 1 MPa (not usable under vacuum)
Max. temperature60 degree(C) (5 – 60 degree(C) no freeze condition)
Min. differential pressure0 MPa (0.1 MPa or more is required when installed with the coil sideways)
Ambient temperatureMax. 50 degree(C) (no freeze condition)
Rated voltageAC 110/220V selective type – 50/60Hz common
Valve seat leakageNone (by confirming pressure gauge visually)
Installation postureHorizontal or vertical (the coil has to be within 90 degrees from upward position)
Protection classIP64
MaterialBodyBronze
ValveNBR (Diaphragm)

Remarks

* Available with rubber material FKM for the diaphragm. Max temperature:90℃.


Dimensions and Weights

SizeL (mm)HWeightCv value
10A(3/8)701141.13(1.2)
15A(1/2)701141.14(1.7)
20A(3/4)801211.37.5(3.2)
25A(1)951281.710(4.6)
32A(1 1/4)1101502.514(5.5)
40A(1 1/2)1201573.117(6.5)
50A(2)1401725.024(9.5)

*Values in the bracket indicate Cv values when the differential pressure is below 0.01MPa.

About flow rate
Nominal Size Selection Chart (For Water)
Nominal Size Selection Chart (For Air)

Dimensional drawing

Dimensional drawing

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top