Fukuda Seiko, Nhật Bản
Fukuda Seiko 4TE Dao Phay Đầu Côn 4 Me – Tapered End Mill 4 Flute

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: 4TE
Mô tả
- Là loại dao phay được sử dụng để gia công góc thoát khuôn. Bằng cách sử dụng một lưỡi xoắn đều, có thể thu được độ sắc nét ổn định và độ chính xác xử lý cao.
- Chất liệu: HSS-Co (SKH56)
- Góc nghiêng me: Xoắn phải 25°
- Dung sai góc: ±5′
- Dung sai đường kính đầu mũi: 0 đến -0,05
* Cắt trung tâm
Bản vẽ kỹ thuật
Thông số kỹ thuật
■ Tapered edge end mill 4-flute (single angle 0°30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
0゚30′ | *3 | 3.26 | 15 | 61 | 6 |
4 | 4.35 | 20 | 66 | ||
5 | 5.44 | 25 | 71 | ||
6 | 6.52 | 30 | 80 | 8 | |
8 | 8.7 | 40 | 90 | 10 | |
10 | 10.87 | 50 | 110 | 12 | |
12 | 13.05 | 60 | 120 | ||
16 | 17.4 | 80 | 170 | 16 | |
20 | 21.75 | 100 | 200 | 20 | |
25 | 26.75 | 25 |
■ Tapered edge end mill 4-flute (single angle 1°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
1° | *3 | 3.52 | 15 | 61 | 6 |
4 | 4.7 | 20 | 66 | ||
5 | 5.87 | 25 | 71 | ||
6 | 7.05 | 30 | 80 | 8 | |
8 | 9.4 | 40 | 90 | 10 | |
10 | 11.75 | 50 | 110 | 12 | |
12 | 14.09 | 60 | 120 | ||
16 | 18.79 | 80 | 170 | 16 | |
20 | 23.49 | 100 | 200 | 20 | |
25 | 28.49 | 25 |
■ Tapered edge end mill 4-flute (single angle 1゚30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
1゚30′ | *3 | 3.79 | 15 | 61 | 6 |
4 | 5.05 | 20 | 66 | ||
5 | 6.31 | 25 | 71 | ||
6 | 7.57 | 30 | 80 | 8 | |
8 | 10.09 | 40 | 90 | Ten | |
10 | 12.62 | 50 | 110 | 12 | |
12 | 15.14 | 60 | 120 | 16 | |
16 | 20.19 | 80 | 170 | 20 | |
20 | 25.24 | 100 | 200 | 25 | |
25 | 30.24 | 32 |
■ Tapered edge end mill 4-flute (single angle 2°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
2° | *3 | 4.05 | 15 | 61 | 6 |
4 | 5.4 | 20 | 66 | ||
5 | 6.75 | 25 | 71 | 8 | |
6 | 8.1 | 30 | 80 | ||
8 | 10.79 | 40 | 90 | 10 | |
10 | 13.49 | 50 | 110 | 12 | |
12 | 16.19 | 60 | 120 | 16 | |
16 | 21.59 | 80 | 170 | 20 | |
20 | 26.98 | 100 | 200 | 25 | |
25 | 31.98 | 32 |
■ Tapered edge end mill 4-flute (single angle 2°30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
2゚30′ | *3 | 4.31 | 15 | 61 | 6 |
4 | 5.75 | 20 | 66 | ||
5 | 7.18 | 25 | 71 | 8 | |
6 | 8.62 | 30 | 80 | 10 | |
8 | 11.49 | 40 | 90 | 12 | |
10 | 14.37 | 50 | 110 | 16 | |
12 | 17.24 | 60 | 120 | ||
16 | 22.99 | 80 | 170 | 20 | |
20 | 28.73 | 100 | 200 | 25 | |
25 | 33.73 | 32 |
■ Tapered edge end mill 4-flute (single angle 3°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
3° | *3 | 4.57 | 15 | 61 | 6 |
4 | 6.1 | 20 | 66 | ||
5 | 7.62 | 25 | 71 | 8 | |
6 | 9.14 | 30 | 80 | 10 | |
8 | 12.19 | 40 | 90 | 12 | |
10 | 15.24 | 50 | 110 | 16 | |
12 | 18.29 | 60 | 120 | 20 | |
16 | 24.39 | 80 | 170 | 25 | |
20 | 30.48 | 100 | 200 | 32 | |
25 | 35.48 |
■ Tapered edge end mill 4-flute (single angle 4°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
4° | *3 | 5.1 | 15 | 61 | 6 |
4 | 6.8 | 20 | 66 | 8 | |
5 | 8.5 | 25 | 71 | ||
6 | 10.2 | 30 | 80 | 10 | |
8 | 13.59 | 40 | 90 | 12 | |
10 | 16.99 | 50 | 110 | 16 | |
12 | 20.39 | 60 | 120 | 20 | |
16 | 27.19 | 80 | 170 | 25 | |
20 | 33.99 | 100 | 200 | 32 | |
25 | 38.99 |
■ Tapered edge end mill 4-flute (single angle 5°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
5° | *3 | 7.37 | 25 | 75 | 6 |
4 | 9.25 | 30 | 80 | 8 | |
5 | 11.12 | 35 | 85 | 10 | |
6 | 13 | 40 | 90 | 12 | |
8 | 16.75 | 50 | 110 | 16 | |
10 | 20.5 | 60 | 130 | 20 | |
12 | 22.5 | ||||
16 | 30 | 80 | 170 | 25 | |
20 | 37.5 | 100 | 200 | 32 | |
25 | 42.5 | 42 |
■ Tapered edge end mill 4-flute (single angle 6°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
6° | *3 | 8.26 | 25 | 75 | 8 |
4 | 10.31 | 30 | 80 | 10 | |
5 | 12.36 | 35 | 85 | 12 | |
6 | 14.41 | 40 | 90 | ||
8 | 18.51 | 50 | 110 | 16 | |
10 | 22.61 | 60 | 130 | 20 | |
12 | 24.61 | ||||
16 | 32.82 | 80 | 170 | 32 | |
20 | 41.02 | 100 | 200 | ||
25 | 46.02 | 42 |
■ Taper blade end mill 4-flute (single angle 7°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
7° | *3 | 9.14 | 25 | 75 | 8 |
4 | 11.37 | 30 | 80 | 10 | |
5 | 13.59 | 35 | 85 | 12 | |
6 | 15.82 | 40 | 90 | ||
8 | 20.28 | 50 | 110 | 16 | |
10 | 24.73 | 60 | 130 | 20 | |
12 | 26.73 | 25 | |||
16 | 35.65 | 80 | 170 | 32 | |
20 | 44.56 | 100 | 200 | 42 | |
25 | 49.56 |
■ Tapered edge end mill 4-flute (single angle 8°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
8° | *3 | 10.03 | 25 | 75 | 10 |
4 | 12.43 | 30 | 80 | 12 | |
5 | 14.84 | 35 | 85 | ||
6 | 17.24 | 40 | 90 | 16 | |
8 | 22.05 | 50 | 110 | 20 | |
10 | 26.86 | 60 | 130 | 25 | |
12 | 28.86 | ||||
16 | 38.49 | 80 | 170 | 32 | |
20 | 48.11 | 100 | 200 | 42 | |
25 | 53.11 |
■ Tapered edge end mill 4-flute (single angle 10°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
10° | *3 | 11.82 | 25 | 75 | 10 |
4 | 14.58 | 30 | 80 | 12 | |
5 | 17.34 | 35 | 85 | 16 | |
6 | 20.11 | 40 | 90 | ||
8 | 25.63 | 50 | 110 | 20 | |
10 | 31.16 | 60 | 130 | 25 | |
12 | 33.16 | 32 | |||
16 | 44.21 | 80 | 170 | ||
20 | 55.27 | 100 | 200 | 42 | |
25 | 60.27 |
■ Tapered edge end mill 4-flute (single angle 15°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
15° | *3 | 16.4 | 25 | 85 | 16 |
*4 | 20.08 | 30 | 90 | ||
5 | 23.76 | 35 | 110 | 20 | |
6 | 27.44 | 40 | 120 | 25 | |
8 | 34.79 | 50 | 140 | 32 | |
10 | 42.15 | 60 | 150 | ||
12 | 44.15 | ||||
16 | 58.87 | 80 | 170 | 42 | |
20 | 73.59 | 100 | 200 |
■ Tapered edge end mill 4-flute (single angle 20°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
20° | *3 | 21.2 | 25 | 85 | 16 |
*4 | 25.84 | 30 | 90 | 20 | |
*5 | 30.48 | 35 | 110 | 25 | |
6 | 35.12 | 40 | 120 | ||
8 | 44.4 | 50 | 140 | 32 | |
10 | 53.68 | 60 | 150 | 42 | |
12 | 55.68 | ||||
16 | 74.24 | 80 | 170 | ||
20 | 92.79 | 100 | 200 |
■ Tapered edge end mill 4-flute (single angle 25°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
25° | *3 | 21.65 | 20 | 100 | 16 |
*4 | 27.32 | 25 | 105 | 25 | |
*5 | 32.98 | 30 | 110 | ||
6 | 38.64 | 35 | 120 | 32 | |
8 | 40.64 | ||||
10 | 47.3 | 40 | 140 | ||
12 | 49.3 | ||||
16 | 62.63 | 50 | 150 | 42 | |
20 | 75.96 | 60 | 160 |
■ Tapered edge end mill 4-flute (single angle 30°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
30° | *4 | 27.09 | 20 | 100 | 25 |
*5 | 28.09 | ||||
6 | 34.87 | 25 | 110 | 32 | |
8 | 36.87 | ||||
10 | 44.64 | 30 | 130 | ||
12 | 46.64 | ||||
16 | 73.74 | 50 | 150 | 42 | |
20 | 77.74 |
Related Products
-
Chiyoda Seiki Máy Cắt Loại C/Loại G (Dành cho AC/LPG) – Type C/Type G Cutting Machine (for AC/LPG)
-
Maxpull BMW-501-ED Tời Điện Ba Pha 200V Với Máy Quấn Cáp – Maxpull BMW-501-ED Three-phrase 200V Electric Winch with Capstan
-
Kitz ZET Van bi đồng Type 600 (Full Bore) – Type 600 Brass Ball Valves (Full Bore)
-
Saitama Seiki U-TOOL U-53SP Máy Đánh Bóng – Polishing Sander
-
Chiyoda Seiki SGX-10A Bộ Điều Chỉnh Lưu Lượng/Áp Suất/Bộ Điều Tốc Nhỏ/Vừa/Lớn (Small/Medium/Large Flow/Pressure Regulator/Governor For General Industrial Gas)
-
Mikasa 16″MW-DC Lưỡi Cắt Kim Cương – Mikasa 16″MW-DC Diamond Blade